The grab rail used on the RS Aero and the new style RS 200. This grab rail measures approximately 63cm.

Replacement Gooseneck Spigot for the RS Aero. Connects the boom end plug to the Gooseneck Assembly.

Only the pigment is supplied. Clear gelcoat and catalyst will need to be purchased separately. Due to some tricky and expensive hazards goods rules around shipping, in most case these items will need to be sourced locally. 20g of RS Pigment mixed into...

Centerboard case gasket fluff for the RS Aero. Glued into the centerboard case to give the daggerboard a good tight fit, but it is also low friction so the board can still be easily pulled in and out.The item width is 13mm. Sold per meter. Also used on...

Selden Block Tie Deck Organiser for the RS Aero. Used on the Port side of the Mast Step to mount blocks for the outhaul and to secure the daggerboard bungee line. Used on the Starboard side of the Mast Step to mount blocks for the downhaul and vang.

The standard batten tip/batten cap used for the battens in the RS Aero & RS Neo mainsails, plus the key used to tension the battens. Adjust batten tension by turning the hex screw in the batten tip.

Batten set for the RS Aero 7 Sail.

Batten set for the RS Aero 5 Sail.

Transom Bung for these RS boats: RS Tera RS CAT 16 RS Quba RS Feva RS Neo RS Vision Also used as cockpit bung on RS Tera.

1/4 inch shockcord line in silver from Hobie Cat.   RESOURCES & SUPPORT Hobie Cat Parts Locators Hobie Cat Rigging Guides Shop All Hobie Cat Parts

Show your Hobie Cat pride with this 12 inch "Hobie Sailing" decal. Vinyl sticker for easy application.   RESOURCES & SUPPORT Hobie Cat Parts Locators Hobie Cat Rigging Guides Shop All Hobie Cat Parts

#8 x 3/8 PHSMS PH SS screw from Hobie Cat.   RESOURCES & SUPPORT Hobie Cat Parts Locators Hobie Cat Rigging Guides Shop All Hobie Cat Parts

10-16 x 1-1/2 SELF-TAP screw from Hobie Cat.   RESOURCES & SUPPORT Hobie Cat Parts Locators Hobie Cat Rigging Guides Shop All Hobie Cat Parts

Small single block with a variety of applications on various Hobie sailboats and kayaks. Made by Hobie Cat.   RESOURCES & SUPPORT Hobie Cat Parts Locators Hobie Cat Rigging Guides Shop All Hobie Cat Parts

Hobie Hatch Liner for the forward hatch in the Hobie Mirage Outback 2019+. The forward hatch bucket can be used to store gear or fish and keeps items from sliding around inside the hull. A great storage solution for your Hobie Outback kayak.  ...

A triangle safety orange flag with reflective piping. The flag stands out from the pole without wind. Simple, easy to install and remove from your kayak.This new flag system uses the Hobie threaded fittings as the mount point. Simply remove one of the...