Harken Small Boat furling systems allow the trailerable cruising or dinghy sailor to set and furl the jib from the cockpit. An optional hoistable ball bearing halyard swivel can be installed on your headstay so you can raise or lower the sail without...

The X-Treme Angle Fairlead allows releasing and recleating at angles up to 90 degrees to the cleat. Kit includes hardcoat-anodized 150 aluminum Cam-Matic and 375 X-Treme Angle Fairlead.

Ball bearing swivel bases feature dual rows of Delrin ball bearings that swivel freely even under high loads. Bases include stand-up springs and a U-adaptor to accept a variety of appropriate blocks. ONE DESIGN APPLICATIONS This fitting is commonly used...

Wire fairleads maintain a low profile while holding the line close to the cleat. Kit includes lightweight, fiber-reinforced 471 Carbo Cam, and 475 wire fairlead. ONE DESIGN APPLICATIONS This fitting is commonly used and/or recommended for the following...

The X-Treme Angle Fairlead allows releasing and recleating at angles up to 90 degrees to the cleat. Kit includes hardcoat-anodized 468 aluminum Micro Cam-Matic and 476 X-treme Angle Fairlead. ONE DESIGN APPLICATIONS This fitting is commonly used and/or...

Fast Release fairleads feature low-friction, angled stainless steel line guides on the exit side of the cleat. The angled lead keeps the line away from the cam to eliminate unexpected recleats during maneuvers. Use for fast spinnaker take-downs during...

Ball bearing swivel bases feature dual rows of Delrin ball bearings that swivel freely even underhigh loads. Bases include stand-up springs and a U-adaptor to accept a variety of appropriate blocks. The 144 is the standard configuration with a tall arm...

Low-friction Bullet blocks lead control lines aft. They are compact and lightweight, with fast trim and release under high or low loads. A range of styles lets these blocks adapt to almost all control line applications. Sheave Ø (mm) 22 mm ...

Carbo Ratchets allow sailors to hand-hold loaded lines and offer balance between holding power and controlled easing. ONE DESIGN APPLICATIONS This fitting is commonly used and/or recommended for the following one design sailboat applications: J105...

Low-friction Carbo Air blocks are lightweight, strong, reliable—and affordable. Companions to the popular Harken Black Magic block line, these small, compact blocks have very high working loads for safe, easy trimming. ONE DESIGN APPLICATIONS This...

Low-friction Carbo Air blocks are lightweight, strong, reliable—and affordable. Companions to the popular Harken Black Magic block line, these small, compact blocks have very high working loads for safe, easy trimming. ONE DESIGN...

Low-friction Carbo Air blocks are lightweight, strong, reliable—and affordable. Companions to the popular Harken Black Magic block line, these small, compact blocks have very high working loads for safe, easy trimming. ONE DESIGN APPLICATIONS This...

High-strength pivoting lead blocks with cams are used for halyard controls on larger keelboats and as head knockers on dinghies and beachcats for sheeting directly from the boom. Hole spacing and rivet size are the same as Classic models, making upgrades...

Low-friction Carbo Air blocks are lightweight, strong, reliable—and affordable. Companions to the popular Harken Black Magic block line, these small, compact blocks have very high working loads for safe, easy trimming. ONE DESIGN APPLICATIONS This...

Low-friction Micro blocks are compact and lightweight. They are ideal for sailboards, smaller dinghies, and lightly loaded control lines on boats of all sizes. ONE DESIGN APPLICATIONS This fitting is commonly used and/or recommended for the following one...

The 16 mm is Harkens smallest block. It is perfect for small synthetic control lines found on high-tech dinghies. The patented bearing system uses stainless steel balls in a captive grooved race and has a 250 lb (113 kg) maximum working load. The 442...