RS Sailing

Strop line connecting Ronstan Shock Blocks in the over deck control line upgrade for the RS Aero. Passes through gunwale from forward to aft holes.

Mast Base Plug for the RS Aero. End Cap/Plug which fits into the bottom of the Aero Mast.

Plastic collar that fits onto the lower mast. Serves as the wear surface between the mast and mast step ring/collar, whose part number is: AER-HF-201.

Fitting on the RS Aero Mast that routes the halyard. Prevents the halyard from uncleating due to mast bend when the sail is under load.

Side Mainsheet Cleat Kit for the RS Aero.

Mainsheet Base Retro Fit for the RS Aero. Non swiveling. Includes base, eyestrap, and 3 screws. Shoe, shackle, spring, cup, and block sold separately. 

Rivets used to secure thru hull fittings that allow outhaul and downhaul to pass through the gunwale on the RS Aero.

Gooseneck Sheave for the RS Aero. This is the sheave for the vang control line. You need two, and they attach to the gooseneck assembly.

Boom Inboard End for the RS Aero. Connects to the boom using one rivet, whose part number is: FIX-R48-C18.

Gooseneck Assembly for the RS Aero. Attaches to mast using four rivets, whose part number is: FIX-R48-C18.

Attachment point for Tactick compass mount.

This is the plastic insert at the rear of the daggerboard case. It provides a buffer between the daggerboard and the rear of the case.