RS Sailing

Batten Set for the RS Tera Pro Mainsail.

Plastic trapeze handle used for trapeze systems on the RS Quest. Can be used for many other pulling operations. 2.5mm hole at the top. Tap can be cut to create a bigger hole.

Spacer/Bushing used on various RS Sailing roto sailboats between the transom and the transom plate. The part number for the transom plate is QUE-HF-503.

Plastic push in 32mm tube end cap. Used on the RS Quest to plug the thru deck bushings on the transom. The part number for the thru deck bushings is RSM-HF-507.

Rudder Stock ('C' Shaped Part) for the RS Quest and RS Toura. Includes rudder pivot bolt. Does not include rudder blade, kick up handle, tiller pivot bolt, tiller tube, or tiller extension.

US Specification Tiller Tube for the RS Quest.

Selden External T-Terminal Tang. Used on the RS Quest.

Pair of 435mm Selden Spreaders used on the RS Quest.

Spinnaker Pole Mast Fitting for the RS Quest. Used to attach the spinnaker pole on RS Quests using symettrical spinnakers. Secured to the lower mast using 3x rivets, whose part number is FIX-R48-M18...

Bow Tube for the RS Quest Bow Sprit/Spinnaker Pole. Allows the Spinnaker Pole to be extended/retracted through the bow.

27mm Fairlead by Selden. Used on the RS Quest to fair the spinnaker halyard as it runs down the centerline between the two 30mm ball bearing blocks. The part number for the blocks is P403101SLC...

45mm Auto Ratchet Block used for the Spinnaker Sheet on the RS Quest. Attaches to the Shroud Eye Bolt using a D Shackle. The part numbers for the eye bolt and shackle are QUE-HF-304 and A-621104,...