RS Sailing

Spring for the mast gate release button on the RS Zest. This spring forces the mast gate release button back into place when the mast gate collar is fully closed. The part number for the mast gate...

Mast gate button used on the RS Zest. Part of the Mast Deck Plate Assembly. When pressed, releases the mast gate arm and therefore allows the mast to be unstepped. When the mast gate arm is closed,...

Mast gate arm for the RS Zest. Secures the mast once stepped. Rotate the arm counter clockwise/to starboard until the mast gate button locks into place.

Mast Deck Plate Assembly for the RS Zest. Receives the mast collar when stepping the mast. Attached to the hull using 5x screws, whose part number is FIX-B6-C50.

Lower mast collar for the RS Zest. Slides into the Mast Deck Plate Assembly when stepping the mast. The part number for the assembly is ZES-HF-200.

Mast boom collar for the RS Zest. Used to attach the boom endboard end fitting/gooseneck, and therefore the boom, to the mast. The part number for the boom end fitting is FEV-SP-911.

RS Zest bow eye bolt. Attach with washer and Nyloc M8 nut, whose part numbers are FIX-W8-002 and FIX-N8-008, respectively.

Scupper Flap Hinge for the RS Venture. Size 370mm x 50mm kiss cut with 5mm radius corners. Material polymetric high tack clear vinyl.

Scupper Flaps for the RS Venture. Allows water to drain out of the cockpit.

Rudder Pivot Bolt for the RS Venture.

Traveler block for the RS Tera. This is a Plain Bearing 38mm Single Block with an inglefield clip. Maximum line size: 10mm. Maximum working load: 341 lbs.

Deck Collar for the RS Tera. Attaches to the mast using 1x rivet. The bottom of the collar passes through the mast step deck plate and then is locked into place by turning the mast. The part numbers...