General Parts

The new Harken Power3 ratchet blocks provide sailors that race small one-designs with three holding-power options to handle a variety of wind and sea conditions. More choices allow sailors to fine-tune their set-ups in tandem with the purchase that...

A low-friction Harken 29mm Carbo AirBlocks from Harken. A lightweight, strong, reliable and affordable block. This variation comes with a removable bolt through the middle so it can be undone and connected to various locations on your boat...

Aluminum Tiller Extension from Harken. The rigid anodized body of this tiller extension transmits subtle boat and rudder movements, allowing you to steer by the feel of the helm. The elegantly simple and lightweight design has no unnecessary...

Aluminum Tiller Extension from Harken. The rigid anodized body of this tiller extension transmits subtle boat and rudder movements, allowing you to steer by the feel of the helm. The elegantly simple and lightweight design has no unnecessary...

Aluminum Tiller Extension from Harken. The rigid anodized body of this tiller extension transmits subtle boat and rudder movements, allowing you to steer by the feel of the helm. The elegantly simple and lightweight design has no unnecessary...

Aluminum Tiller Extension from Harken. The rigid anodized body of this tiller extension transmits subtle boat and rudder movements, allowing you to steer by the feel of the helm. The elegantly simple and lightweight design has no unnecessary...

Aluminum Tiller Extension from Harken. The rigid anodized body of this tiller extension transmits subtle boat and rudder movements, allowing you to steer by the feel of the helm. The elegantly simple and lightweight design has no unnecessary...

Size-for-size in our expanding range, Harken Zircon blocks are the most efficient small boat blocks Harken has ever made. At the core of Zircon performance are industrial ceramic ball bearings mounted inside caged races. The cages keep these bearings...

Size-for-size in our expanding range, Harken Zircon blocks are the most efficient small boat blocks Harken has ever made. At the core of Zircon performance are industrial ceramic ball bearings mounted inside caged races. The cages keep these bearings...

Lightweight, low-friction wire blocks carry wire halyards and high-strength control lines on boats of all sizes. The Harken 466 features a forkhead and becket making it useful for vangs, halyards and control lines. Sheave Ø - 25 mm / 1...

These robust low-friction ball bearing handles match a wide range of cranking needs for both racers and cruisers. Ball bearing grip that efficiently transmits power into the winch. All handles fit international standard winch sockets.

Track is extruded from high-grade 6061-T6 aluminum and hardcoat-anodized for a hard, long-lasting surface. 3807 track mounts to mast using a unique slug system that allows mast-up installation. ONE DESIGN APPLICATIONS This fitting is commonly used and/or...

Harken Small Boat furling systems allow the trailerable cruising or dinghy sailor to set and furl the jib from the cockpit. An optional hoistable ball bearing halyard swivel can be installed on your headstay so you can raise or lower the sail without...

This is a standard bow shackle used commonly on the 420, FJ & V15 and as a mast bail on 3:1 purchase 420 vangs. It is an excellent shackle for all-around use with screw pin included. HAR 2110 1/4 inch / 6mm diameter screw pin for easy...

Use the 237 and 339 where there is little deflection in the line such as when routing a spinnaker pole foreguy aft along the cabin house. Use with Harken 241 cam base. A (mm)32 mm A (in)1 1/4 in B (mm)38 mm B (in)1 1/2 in Fasteners (mm)5 RH...

Stamped shackles are used on most small boat blocks and are appropriate for low loads. This shackle has a 6 mm / 1/4 inch pin with a ring for easy attachment. For higher loads, select forged and high-resistance shackles instead. Shackle pin: (mm)6...