Sunfish Parts

Use these fabric tell tales to ensure correct sail trim. Made from rip stop fabric for durability. Adhesive patches are included for installation on your sail. 3 Green 3 Red Fabric tell tales

This Sunfish cover is a cross between a flat cover and our mast up cover. This cover has the tail on the cover to allow the spars and sail to be stored on deck. It will also be cut wider to make room for the spars on deck. This cover has a large...

The Sunfish Bow Bumper is a simple accessory to keep this vulnerable part of the boat protected from common scratches and dings. It is molded with a high-grade rubber compound so you can be sure it is tough and long lasting. It is a two-piece set,...

The Sunfish top cover will enclose your Sunfish deck, protecting the topsides from the elements. It fits snugly below the rub rail of the hull to seal out dirt and water. The cover installs securely with an elastic cord and webbing loop tie down points...

This is the bronze Sunfish snap trigger. Tie the end of the mainsheet to this and then snap it onto the traveler. Bronze fitting. Use at end of Sunfish mainsheet for convenient attachment to traveler bridle.

The horn cleat is perfect for tying off halyards securely. Used on a variety of small sailboats, including the Sunfish for securing the main halyard. 3-3/4 inch length. Black anodized aluminum. Commonly found on Sunfish deck for main halyard cleating.

Made from a lightweight yarn, these telltales are great to help with correct sail trim. Includes adhesive patches for installation on your sails. 100% wool yarn Adhesive application discs Resists hang ups and sticking 8" long Includes 7 Green and...

This mast up, mooring style Sunfish Deck Cover fits snugly below the rub rail of the hull to seal out dirt and water. This cover is installed with the mast up and the spars and sail down. This cover is held on by an elastic cord in the hem of the cover;...

1/4 turn key style drain plug by RWO.  If your existing drain plug housing does not have threads, this is the drain plug you want to buy. If your housing has threads, please take a look at our other drain plug offerings. 1/4 turn design - not a...

Metal hiking strap plate for 420, FJ and Sunfish. Allows the secure attachment of the hiking straps to the boat. Stainless Steel Zim Part # 20015 / Laser Performance Part # 91131 Compatible with both Zim and Laser Performance boats

The regular eyestrap provides an attachment point for a variety of applications such as the Laser hiking strap and mainsheet block. It's also used for the cunningham on V15s, 420s and FJs and other boats. Stainless Steel Flared eye minimizes chafing...

Item Discontinued - Shop Current Sunfish Parts The bullseye fairlead guides the main halyard to the horn cleat near the base of the mast. It makes raising and lowering the sail with the halyard line much easier. Fits all sizes of main...

Keep your Sunfish sailboat secure to the dock or your dolly with this handy bow line. Pre cut from an 8mm floating line material to our recommended length of 10 feet. A must for any Sunfish sailors! Line: 8mm PolyPro Length: 10 feet Line color may...

The new design Sunfish Tiller is stronger and more durable than the wooden ones of the past. This new aluminum tiller and extension fits all rudders and gives a great feel to the boat. Includes 36" tiller extension. Aluminum construction Fits all...

A premium deck cover for Sunfish sailboats from Colie Sails. Made from Top Gun fabric, this top cover is designed to fit tightly over your boat for use during travel, and will not accommodate spars. Available in LIGHT GRAY with BLUE TRIM with free...