RS Sailing Parts

Selden GNAV Boom Slider with Sheaves.Used on the RS Vision and RS500.

Selden Furler Top Swivel with Guide. Used on the RS Venture and RS Vision as part of the jib roller furling system. Uses a 5mm x 18mm clevis pin.  

Selden Forestay Eye Triangle. Used on RS Feva, RS100, and RS2000 masts. On the Feva two are used to secure a 30mm ball bearing block and the forestay shackle. Attach using three rivets. Part numbers for the block, shackle, and rivets are P403101SWI,...

Eyestrap for securing the RS Quest Forestay to the Mast. Attach using 2x rivets, whose part number is FIX-R48-M18.

100mm diameter black dacron patch. Used on the RS Feva and the RS Vision to cover the hole in the foredeck. Used on RS Vareo on the foredeck to protect the hull from the spinnaker halyard.

RWO standard deck clip two hole eyestrap. Size: 15mm. Fitting hole size: 5mm.

Selden Boom Sliding Eye For Mainsheet. Used on the RS Vision, RS200, and RS500.

38mm eyestrap used on the RS21 next to the sheet bag. Attach using 2x screws. Secures the Selden PBB40 Single Strap Block. Part numbers for the screws and block are FIX-S8-P02 and 404-001-25R, respectively.

27mm eyestrap used on the RS Quest near the aft 30mm spinnaker halyard block. Attach using 2x screws. Part numbers for the halyard block and screws are P403101SLC and FIX-B5-P08, respectively.

Nylon Daggerboard Upper Surround for the RS Tera. Fitted onto top of daggerboard case using six screws, whose part number is FIX-B6-C20. Serves to brace/hold the daggerboard in position.

Grip handle for the RS Feva Daggerboard.

Rubber inserts used at both ends of the daggerboard case to help stabilize the daggerboard.

Replacement Daggerboard tip for aluminium daggerboards. Suitable for: RS Feva, RS Vareo, RS Quba, RS Tera, and the RS Neo.

The RS Dagger Board Bag is used to protect your dagger board during transportation or for storage. Suitable for the RSFeva, RSQuba, RSVareo, RSAero, RS300, RS600 or RS700.

New style aluminium daggerboard, as supplied on a new boat. Fits all existing RS Fevas and is the replacement RS Vareo daggerboard.

Bullseye fairlead used on the RS Aero. This fairlead is used twice on the bow in both respects. Attach using 2x screws, whose part number is FIX-S10-P15.