RS Sailing Parts

Centerboard case gasket fluff for the RS Aero. Glued into the centerboard case to give the daggerboard a good tight fit, but it is also low friction so the board can still be easily pulled in and out.The item width is 13mm. Sold per meter. Also used on...

Selden Block Tie Deck Organiser for the RS Aero. Used on the Port side of the Mast Step to mount blocks for the outhaul and to secure the daggerboard bungee line. Used on the Starboard side of the Mast Step to mount blocks for the downhaul and vang.

Spacer tube used on the transom of the RS Zest where the soft loop attaches.

Stainless steel transom plate for the RS Zest. This is the plate that the gudgeons attach to.

Replacement Thrwart for the RS Zest. This yellow crosspiece provides support and can double as a seat. Install using 3x M5x70mm Phillips Panhead bolts, which are sold separately. Thwart assembly Fits RS Zest sailboat Use 3x M5x70mm...

Hiking Strap Set (pair) for the RS Zest. Secured under the hiking strap attachment plate, whose part number is RSM-HF-301.

A complete single trapeze kit for the RS Venture. Comes with both trapeze wires, handles, and clamcleats.

Pair of 485mm long spreaders used on the RS Venture. For a complete spreader set up, purchase the spreader bracket + associated hardware, spreader tips, and clevis pin/ring ding. The part numbers for the spreader bracket, spreader tips, and clevis...

The foam wedge used to hold the spinnaker sock in place under the foredeck of the RS Venture. Also used on the RS100. Specifications: Plain R478 Black PE Foam.

Allen 30mm Dynamic Block: Single With Lacing Eye. Used on the RS Venture as the Spinnaker Halyard Block.

Selden Metal Mast Step for the RS Venture. Includes 2 mast step bolts and screws. Also used on the RS200, RS400, RS500, RS700, and RS2000.

Complete Deck Mast for the RS Venture.

Hiking Strap Plate for the RS Venture. Also used on the RS100.

Forestay for the RS Venture S and RS Venture SE. Not for use on the RS Venture Connect or RS Venture Connect SCS.

Pivot Bolt Plate for the RS Venture. Attached to the Ballasted Centerboard using 2x screws. The part numbers for the ballasted centerboard and screws are VEN-FO-202 and FIX-B6-P20, respectively.

Retaining eyestrap for the RS Venture Bowsprit. Used to hold rear of bowsprit in place when the bowsprit is extended. Also used on the RS500 and RS700.