Opti Parts

These 9" die-cut sail numbers have a sticky adhesive on one side that will bind them to the sail. Once applied and set, the numbers will be able to withstand the elements of sailing without falling off. If you need to change your numbers for any reason...

The BlackGold Power boom is a stiffer, 45mm Optimist boom to keep more tension on the leech for the heavier sailor. The smaller bridle gives more space when tacking. All Optiparts Optimist booms are made from high grade, tempered tube and include...

This sticker acts as a guide, allowing you to hoist and trim the sail to the proper level on an Optimist sailboat. Use Blue for Silver / Quicksilver Optimist masts Measures position of sail relative to the mast and boom

The OptiParts BlackGold sprit is a 27mm racing sprit designed for light to medium weight sailors. Pairs well with the BlackGold Power 45mm boom and BlackGold Medium 40mm boom and is found in both the BlackGold Power and BlackGold Medium spar sets. Use...

Short tapered batten for Optimist racing sail. More flexible that standard battens, this batten is tapered to a very thin end to allow maximum bend in the leech of the sail.  Fiberglass tapered batten 45.5 cm length Sold...

The Opti mast step base plate is mounted to the boat and seats the mast step cup. Stainless steel construction Has scale which enables the sailor to see the precise positioning of the mast step cup so that the mast rake can be repeated PLATE ONLY

Fits the aft end of the boom and accepts the outhaul line. The cap fits any 55mm racing boom. Fits all 55mm Opti booms

Optimist class logo for sail. Cut from a blue, self adhesive sailcloth material. Sold in a two pack. Optimist class logo insignia Blue sail cloth fabric Sold in a two pack

The 55mm boom jaw fits the large 55mm racing booms. Seals the boom from water intrusion as well. Fits all 55 mm optimist booms

This "New Rule" fiberglass daggerboard, designed for racing, meets class legal requirements. The board is also constructed to maximum thickness so that it is more durable.

Optimist vang for all racing booms from Optiparts. Spliced Dyneema line with a loop on one end for easy attachment. Tie or splice the open end around the boom. Dyneema line - no stretch! Loop on one end, tie or splice other end around boom...

Heavy duty rubber corner protectors for Optimist with self adhensive backing. These can be used on bow only or on all 4 corners. Special preshaped rubber profile. This is not a flat piece of thin rubber! Corner Protector Set Sold in two pack

The Opti bridle ring provides a solid attachment point for the clip at the end of the mainsheet. The ring sits in the center of the bridle to keep the mainsheet centered. Stainless Steel 5/8 inch diameter Standard for Optimist rigs

Pure vectran line is a super low stretch with no cover. It's Perfect for Optis and all sorts of small low-stretch applications that do not require a cleat. Pure, uncovered Vectran line. 3mm diameter. 16 meter / 52 foot mini spool.

The Opti sprit sleeve protects the sprit from wearing against the mast. The heat shrinkable tubing fits around a 25mm or a 27mm sprit and then shrinks to fit snugly. Fits any Opti sprit Length: 15cm Hair dryer or paint stripper can be used to...