Mast & Boom

This pole ring is riveted to the mast and allows the spinnaker pole to be easily and securely clipped to the mast. Fits the 420 and FJ masts. Stainless steel Zim Part # 20220 / Laser Performance Part # 90568 Compatible with both Zim and Laser...

Replacement spreader tip for both C420 and FJ sailboats from Zim and Laser Performance. The spreader tip inserts into the end of the spreader and keeps the shroud connected to the tip of the spreader.  Aluminum construction Sold...

This is a trapeze ring for a trapeze and spinnaker rigged 420. Ring Only Stainless Steel Zim Part # 20099 / Laser Performance Part # 90603 Compatible with both Zim and Laser Performance boats

Complete trapeze wire assembly for the Club 420 sailboat. Includes a single wire with rope adjuster and base and hoop for clipping in harness. Complete Assembly Includes Line and Wire Original Equipment Zim Part # 20062 / Laser Performance Part # 90230...

This is a part of a complete gooseneck, used to mount the boom onto the mast. The " bracket is attached to the end on the boom. Designed for all Club 420, FJ, and V-15 sailboats. Stainless Steel Bracket Only Zim Part # 20139 / Laser Performance Part #...

This is the original 3:1 purchase vang used on V15, Club 420 & FJ sailboats. 3:1 Purchase Power Original Equipment Zim Part # 20167 / Laser Performance Part # 90605 Compatible with both Zim and Laser Performance boats

Spreader bracket for Club 420, FJ, and Vanguard 15 sailboats to attach spreaders to the mast. Stainless steel bracket Zim Part # 20171 / Laser Performance Part # 90003 Compatible with both Zim C420 and FJ sailboats and LaserPerformance C420, FJ, and...

The shroud adjuster allows shroud tension to be adjusted by moving the pins up or down on 420, FJ, or V15. Commonly used on Vanguard, LaserPerformance, and Zim sailboats. Multiple Holes for Adjusting 1/4 inch Holes Part Number 90583 Sold...

The hounds bracket is the mount for the forestay, jib halyard, and tangs which hold the shrouds. The bracket is riveted to the mast of Club 420, FJ, and V-15 sailboats. Clevis pins and ring dings included Sold without shroud tangs Stainless Steel Zim...

These fittings attach to each end of a spinnaker/whisker pole. Fits standard 420 and FJ spin poles with 1 inch diameter. Fits most 1 inch outer diameter poles. Includes Metal jaw w/spring. inside Diameter: .9 inches. Zim Part # 20183 / Laser Performance...

This shackle is primarily used to attach the jib halyard block to the mast hounds assembly. Includes Clevis Pin and Ring

Standard 1/8 inch diameter shroud for Club 420 sailboats. Original equipment on new boats and a replacement for existing shrouds on Zim and LaserPerformance boats. Stainless steel 1/8 inch wire Approximately 13' 5" long Class legal for Club 420...

Tapered spinnaker pole for Club 420 & Club FJ. Rigged with fittings, ready to sail. Tapers from 38mm to 25mm at each end for maximum stiffness in the area of maximum load, but minimum overall weight. Pole has a center eyestrap and is setup for...

This plug fits the bottom of all FJ, Club 420, and V-15 mast bases to mate with mast step, which is installed to the deck. Original equipment on new Club 420, FJ, and V-15 sailboats. Zim Part # 20129 / Laser Performance Part # 90559 Compatible with both...

Complete assembly for shrouds and jib halyard block attachment on Club 420, FJ, and V-15 sailboats. Includes tangs for both shrouds Includes bolt and nut to attach to mast Stainless steel construction Zim Part # 20128 / Laser Performance Part # 90510...

Forestay wire for Club 420 sailboats from Zim and Laser Performance. This stainless steel forestay supports the mast from the bow. 3/32 inch diameter Approximately 14 foot 6 inches long Fits Club 420 sailboats from Zim and LaserPerformance Zim Part...