Class legal racing sail for the ILCA 4 by Hyde. Made from a heavy weight dacron for long sailing life and comes folded. Includes sail bag and free sail numbers/installation. Designed to work with the ILCA 4 lower mast section that has a pre-bend and...

The boom block with becket is attached to the aft end of the ILCA boom. Pass your mainsheet through the block, down to the traveler block, and back up to secure to the becket. A great upgrade for an older boat, particularly for light air sailing!...

The standard boom block is mounted to the mid point of the ILCA boom. Pass your mainsheet up from your mainsheet block, through the boom block, and then aft to the boom block with becket to complete your rigging. Attaches to the boom with the stainless...

Integrated large and small ILCA traveler block from Harken with ball bearings for great performance. Replaces the standard 'traveler block large' and 'traveler block small' which are connected with a sister clip to reduce the space between the blocks and...

The new Series 30 Curved Vang Key for Laser / ILCA from Ronstan. The vang key attaches to the upper vang block and slides into the boom vang plate that is mounted on the ILCA / Laser boom. It provides a quick but solid connection for easy rigging...

ILCA High Load Vang Block from Ronstan Upgrade your ILCA vang with this new high load upper vang block from the hardware experts at Ronstan. Introduced as part of the Series 30 Block collection, the RF34108HL is a low friction, low profile vang...

ILCA High Load Vang Block with Key from Ronstan Upgrade your ILCA vang with this new high load upper vang block from the hardware experts at Ronstan. Introduced as part of the Series 30 Block collection, the RF34108HLK is a low friction, low profile...

The standard boom block is mounted to the mid point of the ILCA boom. Pass your mainsheet up from your mainsheet block, through the boom block, and then aft to the boom block with becket to complete your rigging. Attaches to the boom with the stainless...

The boom block with becket is attached to the aft end of the ILCA boom. Pass your mainsheet through the block, down to the traveler block, and back up to secure to the becket. This is the latest ball bearing version from Harken as included on all new...

Complete 'XD' (race spec) Cunningham and Outhaul Kit for ILCA dinghes. Assembled using top end Harken hardware, the kit includes new, lightweight Harken airblocks, Dynemma SK78 primary lines, and Dinghy Control secondary lines. Cunningham is rigged as a...

Replacement gudgeon for the ILCA dinghy and Laser sailboat. Two of these are mounted on the transom of the boat and used for attaching the rudder head. Installs with 4 screws (not included). Sold individually and made from a heavy duty plastic for long...

Complete autobailer assembly for the ILCA dinghy with bailer plate, chute door, bung, and screw. This is a class legal bailer with ILCA stamp on body of the bailer. Autobailer assembly Includes plate, chute door, bung, and screw ILCA branding Class...

Replacement grab rail for the ILCA dinghy. Heavy duty plastic construction. Included on all new boats and also works with a number of other small dinghies.

Complete Deck Cleat Plate assembly with Harken cleats and fairleads. Attaches to the ILCA dinghy deck with two screws and used for cleating your outhaul and cunningham lines that run back from the deck blocks mounted behind the mast.

The deck blocks plate is mounted just aft of the ILCA mast step and is a mounting point for two turning blocks for your outhaul and cunningham lines. This is the complete deck blocks plate assembly includes two Harken 16mm air blocks and is standard on...

The deck blocks plate is mounted just aft of the ILCA mast step and is a mounting point for two turning blocks for your outhaul and cunningham lines. This is the plate only, handly for replacing an old plate or for upgrading with your own favorite blocks.