Hardware

Screw 1/4-20 X 1" OHMS-PH SS HCC Part # 8030212 Screw 1/4-20 X 1" OHMS-PH SS   RESOURCES & SUPPORT Hobie Cat Parts Locators Hobie Cat Rigging Guides Shop All Hobie Cat Parts

Makes it easy to remove expensive mainsheet systems from your boat when it"s parked on the beach or for ease of take down and set up for trailering.   RESOURCES & SUPPORT Hobie Cat Parts Locators Hobie Cat Rigging Guides Shop All Hobie...

3/16 inch diameter clevis pin with a 1 1/16 inch grip length (distance between end of pin and hole for ring ding) from Hobie Cat. Made from stainless steel and sold individually. Pin Diameter (A) is 3/16 in (5 mm) Pin Grip Length (B) is 1 1/16 in (27...

3/16 inch diameter clevis pin with a 7/8 inch grip length (distance between end of pin and hole for ring ding) from Hobie Cat. Made from stainless steel and sold individually. Pin Diameter (A) is 3/16 in (5 mm) Pin Grip Length (B) is 7/8 in (22...

Great little helpers for quick rudder removal. Forget the aggravation of straightening those cotter pins! A definite plus for trailering. Stainless Steel. 5/16" Diameter.   RESOURCES & SUPPORT Hobie Cat Parts Locators Hobie Cat Rigging Guides...

Replacement mast caution sticker in Orange from Hobie Cat.   RESOURCES & SUPPORT Hobie Cat Parts Locators Hobie Cat Rigging Guides Shop All Hobie Cat Parts

Protect hands and feet by covering up sharp edges with these soft vinyl molded adjuster covers. Also great for keeping clevis pin rings from getting snagged and working out of the pin. Sold in pairs.   RESOURCES & SUPPORT Hobie Cat Parts...

MAST STEP PIN, 3/16 X 2.125 SS from Hobie Cat. RESOURCES & SUPPORT Hobie Cat Parts Locators Hobie Cat Rigging Guides Shop All Hobie Cat Parts

Keeps those halyards close in to the mast and out of the way so that the jib doesn't hang up on them. Molded from strong Delrin and contoured to the curve of the mast. One on each side of the H16 mast does the trick.   RESOURCES & SUPPORT Hobie...

Starboard side clamcleat from Hobie Cat.   RESOURCES & SUPPORT Hobie Cat Parts Locators Hobie Cat Rigging Guides Shop All Hobie Cat Parts

1/4 inch diameter clevis pin with a 5/8 inch grip length (distance between end of pin and hole for ring ding) from Hobie Cat. Made from stainless steel and sold individually. Pin Diameter (A) is 1/4 in (6.5 mm) Pin Grip Length (B) is 5/8 in (18...

HCC Part # 8050221 Nut (WELL Nut) 10-32 x1   RESOURCES & SUPPORT Hobie Cat Parts Locators Hobie Cat Rigging Guides Shop All Hobie Cat Parts

Easy to install shockcord snap hook. No tools required. Reusable! 5/16" hook.   RESOURCES & SUPPORT Hobie Cat Parts Locators Hobie Cat Rigging Guides Shop All Hobie Cat Parts

Hobie Cat hardware- Split Ring 3/8 inch stainless steel.   RESOURCES & SUPPORT Hobie Cat Parts Locators Hobie Cat Rigging Guides Shop All Hobie Cat Parts

The Fast Shackle was created for the jib clew blocks on the Hobie 16 & 18. It"s a halyard shackle and a 3/16" Avibank ball lock pin permanently wired to the shackle so it won"t drop in the drink when the blocks are released from the jib clew. Can be...

Hog rings can be crimped to secure two pieces of line or a single line in a loop. Commonly use for making shockcord loops on small sailboats. 3/8 inch stainless steel hog ring. Works for up to 3/16 inch or 5 mm diameter line.