Hobie 16

Track used for the jib sheet blocks on the Hobie 16. Works on port or starboard side of front crossbar and installed with rivets. 6 hole track Requires (6) 3/16 X 3/8" CSK Rivets (Part Number 8010201) Also used as a Hobie 18 jib track (port or...

Large size Clevis Ring from Hobie Cat. Works with most clevis pins. Large size stainless steel clevis ring for most clevis pins. Hobie Cat # 20860000.   RESOURCES & SUPPORT Hobie Cat Parts Locators Hobie Cat Rigging Guides Shop All Hobie Cat...

Replacement jib hank with screw from Hobie Cat. RESOURCES & SUPPORT Hobie Cat Parts Locators Hobie Cat Rigging Guides Shop All Hobie Cat Parts

Standard Hobie Cat sailcloth 14 inch sail number. #8 in black with sticky back adhesive. Class legal for all Hobie Cat racing and standard on new sails. RESOURCES & SUPPORT Hobie Cat Parts Locators Hobie Cat Rigging Guides Shop All Hobie Cat Parts

The 10 hole forestay adjuster mades dialing in the rake of your Hobie Cat mast easy. Works on all Hobie Cat catamarans that that allow mast rake, such as the Hobie 14, Hobie 16, Hobie 17, and Hobie 18.   RESOURCES & SUPPORT Hobie Cat Parts...

Shroud anchor pin for Hobie Cat masts. Use anchor bar to secure under lip of hull.   RESOURCES & SUPPORT Hobie Cat Parts Locators Hobie Cat Rigging Guides Shop All Hobie Cat Parts

This mast horn cleat is a replacement for the downhaul or halyard cleat on both the Hobie 14 and Hobie 16. Attach with rivets or screws (not included). Replacement downhaul or halyard cleat Recommended for Hobie 14 and Hobie 16 Does not include hardware...

4.7 mm bow shackle from Hobie Cat with pin.   RESOURCES & SUPPORT Hobie Cat Parts Locators Hobie Cat Rigging Guides Shop All Hobie Cat Parts

Jib car stop for Hobie 16's with integrated jib tracks.   RESOURCES & SUPPORT Hobie Cat Parts Locators Hobie Cat Rigging Guides Shop All Hobie Cat Parts

Trentec luff cap kit for the Hobie 16 mainsail. Prevent "poke through"! These Trentec caps slip over the luff (front) end of your mainsail battens to increase the life of your sails and of the batten-pocket protectors. Each cap is molded at the angle to...

1/4 inch diameter clevis pin with a 5/8 inch grip length (distance between end of pin and hole for ring ding) from Hobie Cat. Made from stainless steel and sold individually. Pin Diameter (A) is 1/4 in (6.5 mm) Pin Grip Length (B) is 5/8 in (16 mm) Sold...

Standard Hobie Cat sailcloth 14 inch sail number. #4 in black with sticky back adhesive. Class legal for all Hobie Cat racing and standard on new sails. RESOURCES & SUPPORT Hobie Cat Parts Locators Hobie Cat Rigging Guides Shop All Hobie Cat Parts

Hobie rudder plunger for H14 and H16 rudders. RESOURCES & SUPPORT Hobie Cat Parts Locators Hobie Cat Rigging Guides Shop All Hobie Cat Parts

Batten cap for mainsail luff tip. Release the batten tension whenever you store your sails. This will prolong the life of your sails. Luff caps and adjustable leach caps are made of high strength, ultra-violet tolerant Delrin. No knots to tie or untie...

Pylon nut used for newer style Hobie 16's. Used with the newer pylon bolt SKU 21712.   RESOURCES & SUPPORT Hobie Cat Parts Locators Hobie Cat Rigging Guides Shop All Hobie Cat Parts

Standard 1 inch diameter mast sheave found on many Hobie Cat mast assemblies. RESOURCES & SUPPORT Hobie Cat Parts Locators Hobie Cat Rigging Guides Shop All Hobie Cat Parts