Hardware

1/4 inch x 3/4 inch stainless steel clevis pin with zinc finish from Ronstan. Features a 3/4 inch grip length (distance between cap and pin hole) and 29/32 inch total pin length. Pin Diameter is 1/4 inches Pin Grip Length is 3/4 inch Sold individually...

The horn cleat is perfect for tying off halyards securely. Used on a variety of small sailboats, including the Sunfish for securing the main halyard. 3-3/4 inch length. Black anodized aluminum. Commonly found on Sunfish deck for main halyard cleating.

The X-Treme Angle Fairlead allows releasing and recleating at angles up to 90 degrees. Add to a standard Harken cam cleat (not included). ONE DESIGN APPLICATIONS This fitting is commonly used and/or recommended for the following one design sailboat...

Forged stainless steel shackles are polished to a high luster and are stamped with the screw pin diameter. This shallow bow shackle shape is best for multidirectional loads and proportionally wider for their length than regular bow shackles. Shackle...

This retaining clip works well for securing rudders and large pins. Great for the Tasar and Moth. Quick and easy to attach plus you can tie it in! Sold individually Stainless steel 3/32" thick 5/8" Diam.

The standard dimensional format shackle provides high load capacity with a compact size. A: 4.8 mm B: 18.0 mm C: 11.0 mm P.L. B.L.: 800 kg U.D.L. B.L.: 1400 kg Weight: 15g

The X-Treme Angle Fairlead allows releasing and recleating at angles up to 90 degrees to the cleat. Kit includes lightweight, fiber-reinforced 471 Carbo Cam and 476 Extreme Angle fairlead. Includes cam 471 Includes fairlead 476 Weight (g)47 g Weight...

The Mini Trigger Shackle from Optiparts attaches to the mainsheet and then hooks onto the boom bridle on the Optimist. The stainless steel shackle can be opened with one hand. Works on any Optimist mainsheet Stainless steel construction Length: 43 mm...

The regular eyestrap provides an attachment point for a variety of applications such as the Laser hiking strap and mainsheet block. It's also used for the cunningham on V15s, 420s and FJs and other boats. Stainless Steel Flared eye minimizes chafing...

Harken ball bearing cam cleats hold lines securely and release instantly for easy, precise trimming. Aluminum Cam-Matics are hardcoat-anodized for high-load, high-wear, continuous adjustment applications. Aluminum construction Works with line diameters...

Intensive development efforts have produced this range of cleats that provide unbeatable holding power, yet are designed for easy cleating and releasing of control lines in every application and load condition. Through the use of advanced composites,...

Black anodized tiller is constructed with two aluminum tubes which are mounted together. the Black anodized tiller includes all fittings, bolts, nuts, and washers to be attached to any Opti rudderblade. Includes all necessary parts for installation...

This shackle has non standard dimensional proportions allowing it to provide the most compact solution in certain specialist applications. Slotted head pins contribute to the efficient minimizing of space A: 4.8 mm B: 19.0 mm C: 10.0 mm D: 5.0 mm P.L. B...

Eyestraps are useful accessories. They form light-duty mounting bases for blocks, serve as lash-down points, and can be used for fairleads. A (mm)48 mm A (in)1 7/8 in B (mm)10 mm B (in) 3/8 in C (mm)38 mm C (in)1 1/2 in D (mm)14 mm D (in) 9/16...

Eyestraps are useful accessories. They form light-duty mounting bases for blocks, serve as lash-down points, and can be used for fairleads. A (mm)36 mm A (in)1 7/16 inB (mm)12 mm B (in)1/2 in C (mm)27 mm C (in)1 1/16 in D (mm)11 mm D (in)7/16...

The side entry fairlead allows ropes to be hooked in for cleating, yet easily removed. This is a great cleat for spinnaker sheets on smaller sailboats. Cut out located on starboard side of cleat. Lightweight Aluminum construction Mounts easily to deck...