FJ Parts

Complete screw-in drain plug assembly by Holt Allen. Screw-in plug Housing screw hole spacing: 38mm / 1.5 inch Plug hole diameter: 22mm / 0.88 inch Includes housing and plug Color: Black Manufacturer: Allen Part Number: A.423 Some use...

This is a standard bow shackle used commonly on the 420, FJ & V15 and as a mast bail on 3:1 purchase 420 vangs. It is an excellent shackle for all-around use with screw pin included. HAR 2110 1/4 inch / 6mm diameter screw pin for easy...

Class approved spinnaker sail for FJ sailboats, made by North Sails. Updated Dark Blue with Light Blue colorway. Class Legal Made by North Sails Zim Part # 20337 / Laser Performance Part # 94502 Compatible with both Zim and Laser Performance...

Cunningham line for FJ sailboat, pre cut by the experts at West Coast Sailing. Line: 5mm Sirius 500 by Robline Length: 5 Feet Typically cut from green / silver spool but exact color may vary Looking for another color or want to specify a different...

This fast pin is used to attach the tack of the main sail to the boom on boats like the C420, FJ, and Vanguard 15. Can also be used on other boats or other applications.  Pin Only Stainless Steel construction Secure Under Load Easily Secures 1/4...

The mast heave sheave allows the main halyard to run smoothly through the mast head. It spins enabling the halyard to be adjusted easily. White Plastic Works on 420, FJ, and V-15 sailboats Zim Part # 20262 / Laser Performance Part # 90579 Compatible...

Zim Sailing has developed a new aluminum tiller for Cal Style CFJ sailboats that is now class approved! The plastic wedge makes our CFJ tiller compatible with a wide range of rudder heads for CFJs from different builders and different years. Say goodbye...

This strong alloy clam ('jam') cleat is perfect for a variety of applications from halyards to travelers to control lines. Integrated fairlead guides line into cleat Mounts easily to flat or curved surfaces Suitable for use with 3mm to 6mm lines...

Pre cut vang line for FJ sailboat. Line: 5mm FSE Sirius Length: 14 Feet(Quantity 1 = 14 foot length) Typically cut from red/silver spool, but exact color may vary Looking for another color or want to specify a different length? Check out the 5mm...

These spreader airfoils are aerodynamically shaped to hold the shrouds. Sold in a set of 2 spreaders and designed for both Club 420 and FJ masts. 16 inch long Aluminum construction Works on both Club 420 and FJ masts for LP and Zim boats Sold as a set...

Pintles are mounted to the transom to accept the gudgeon from a rudder assembly. Use this pintle in the lower position on either FJ or C420 sailboats from Vanguard, LaserPerformance, or Zim Sailing that have a 4 hole mounting pattern. 4 Hole...

Standard drain plug fitting from Beckson. Complete assembly with screw-in plug and housing, with 1 inch plug hole diameter and 1.5 inch mounting hole spacing for drain plug housing. Plastic keeper helps prevent the plug from falling out of the housing...

Mid tie for the FJ Hiking Strap set up, used in the center of the boat. Order two for a full boat. Line: 5mm Robline Sirius 500 line Length: 5 feet (Quantity 1 = 5 foot length) Typically cut from black/silver spool, but exact color may...

FJ jib halyard tail. This line is used along with the standard jib wire halyard. Line: 6mm Pre-Stretch Length: 16 Feet

The Tiller Joint Universal connects a tiller extension with a tiller. The flexible rubber allows for a full range of motion with the tiller extension. New tiller extensions come with a joint universal, so you can use this one to replace one that has...

Use these fabric tell tales to ensure correct sail trim. Made from rip stop fabric for durability. Adhesive patches are included for installation on your sail. 3 Green 3 Red Fabric tell tales