Class legal racing sail for the ILCA 4 by Hyde. Made from a heavy weight dacron for long sailing life and comes folded. Includes sail bag and free sail numbers/installation. Designed to work with the ILCA 4 lower mast section that has a pre-bend and...

Base plug fitting for the ILCA *Composite* upper mast section. Use in conjunction with the Top Section Connector Sleeve to ensure a great fit between your upper and lower masts. This fitting is specific to the composite upper mast sections (not the...

The boom block with becket is attached to the aft end of the ILCA boom. Pass your mainsheet through the block, down to the traveler block, and back up to secure to the becket. A great upgrade for an older boat, particularly for light air sailing!...

The standard boom block is mounted to the mid point of the ILCA boom. Pass your mainsheet up from your mainsheet block, through the boom block, and then aft to the boom block with becket to complete your rigging. Attaches to the boom with the stainless...

Integrated large and small ILCA traveler block from Allen with ball bearings for great performance. Replaces the standard 'traveler block large' and 'traveler block small' which are connected with a sister clip to reduce the space between the blocks and...

The new Series 30 Curved Vang Key for Laser / ILCA from Ronstan. The vang key attaches to the upper vang block and slides into the boom vang plate that is mounted on the ILCA / Laser boom. It provides a quick but solid connection for easy rigging...

ILCA High Load Vang Block from Ronstan Upgrade your ILCA vang with this new high load upper vang block from the hardware experts at Ronstan. Introduced as part of the Series 30 Block collection, the RF34108HL is a low friction, low profile vang...

ILCA High Load Vang Block with Key from Ronstan Upgrade your ILCA vang with this new high load upper vang block from the hardware experts at Ronstan. Introduced as part of the Series 30 Block collection, the RF34108HLK is a low friction, low profile...

Pair of traveler lines for the J/105. This is a set of 2x 20 foot long traveler lines made from 8mm Alpha Ropes SSR, a single braid blend of Spectra and Cordura makes this line both durable and soft in the hand. Very similar to Maffiloli switfcord...

J/105 Mainsheet Gross Tune line, built by the experts in the West Coast Sailing Rig Shop. This mainsheet is made from 10mm Marlow D2 Race, a high-strength, lightweight all-round performance line, finished to a recommended length of 100 feet. End 1...

Mainsheet Fine Tune Line for the J/105. The Fine Tune Line is the secondary line in the mainsheet trimming system, designed for making smaller adjustments to the trim. We use 8mm Alpha Ropes SSR, a single braid blend of Spectra and Cordura...

J/105 Sprit Pole Control line, built by the experts in the West Coast Sailing Rig Shop. This control line is made from 8mm Marlow D2 Race, a high-strength, lightweight all-round performance line, finished to a recommended length of 34 feet with end...

J/105 Jib Sheet with Taper, built by the experts in the West Coast Sailing Rig Shop. Our Jib Sheet lines are made from 10mm Marlow D2 Race, a high-strength, lightweight all-round performance line, finished to a recommended length of 44 feet...

J/105 Tapered Spinnaker Halyard, built by the experts in the West Coast Sailing Rig Shop. This halyard is made from 10mm Marlow D2 Race, a high-strength, lightweight all-round performance line, finished to a recommended length of 100 feet. We add a...

J/105 Tapered Spinnaker Halyard, built by the experts in the West Coast Sailing Rig Shop. This halyard is made from 10mm Marlow D2 Race, a high-strength, lightweight all-round performance line, finished to a recommended length of 100 feet. The sail...

J/105 Tapered Jib Halyard, built by the experts in the West Coast Sailing Rig Shop. This halyard is made from 10mm Marlow D2 Race, a high-strength, lightweight all-round performance line, finished to a recommended length of 93 feet. We add a taper...