Keep your Laser sailboat secure to the dolly or dock with a floating bowline, pre cut to our recommended length of 10 feet. Line: 8mm PolyPro Length: 10 Feet

Downhaul line for the Laser rudder, pre-cut from 4mm Robline Sirius line for your convenience to 4 feet. Line: 4mm Robline Sirius 500 Length: 4 feet (Quantity 1 = 4 foot section of line) Typically cut from Red/Silver spool but color may vary Looking...

The Laser Outhaul Dangle Line is designed to secure your outhaul blocks around the lower mast section at the gooseneck fitting. Use on boats with upgraded Outhual and Cunningham systems. Line: 4mm Robline Sirius 500 Length: 2 feet (Quantity 1 = 2 foot...

Laser mast tie down line. Use this little section of line to prevent your mast from coming out in the event of capsize, securing it around the deck blocks and up over the vang tang. Helps avoid expensive repairs! Line: 3mm Robline Dinghy Control Color:...

Hiking strap adjuster line for the Laser. Use this line along with a bungee to keep your hiking strap in place and properly adjusted for maximum performance. Line: 5mm Robline Sirius 500 line Length: 3 feet (Quantity 1 = 3 foot length) Typically cut...

Spectra line for the Laser clew tie. This line secures the clew of your sail to the boom at the back of the boat. Pre cut to our recommended length. Line: 3mm Dyneema Length: 2 feet

This no stretch line is perfect for the Laser Traveler, pre cut to the perfect length for easy rigging. Line: 5mm Spectra Length: 11 feet

These 12 inch die-cut sail numbers have a sticky adhesive on one side that will bind them to the sail. Once applied and set, the numbers will be able to withstand the elements of sailing without falling off. If you need to change your numbers for any...

These 12" digital sail numbers have a sticky adhesive on one side that will bind them to the sail. Once applied and set, the numbers will be able to withstand the elements of sailing without falling off. If you need to change your numbers for any reason...

These 9" die-cut sail numbers have a sticky adhesive on one side that will bind them to the sail. Once applied and set, the numbers will be able to withstand the elements of sailing without falling off. If you need to change your numbers for any reason...

These 9 inch digital sail numbers have a sticky adhesive on one side that will bind them to the sail. Once applied and set, the numbers will be able to withstand the elements of sailing without falling off. If you need to change your numbers for any...

Official Tasar Class Association numbers for mylar mainsails. To be race legal your boat must have sail numbers. The Tasar sail numbers are red with smooth curved edges. Once the adhesive binds to the sail, they are able to withstand the elements and are...

The BlackGold Power boom is a stiffer, 45mm Optimist boom to keep more tension on the leech for the heavier sailor. The smaller bridle gives more space when tacking. All Optiparts Optimist booms are made from high grade, tempered tube and include...

This sticker acts as a guide, allowing you to hoist and trim the sail to the proper level on an Optimist sailboat. Use Blue for Silver / Quicksilver Optimist masts Measures position of sail relative to the mast and boom

The OptiParts BlackGold sprit is a 27mm racing sprit designed for light to medium weight sailors. Pairs well with the BlackGold Power 45mm boom and BlackGold Medium 40mm boom and is found in both the BlackGold Power and BlackGold Medium spar sets. Use...

Plastic plug for the bottom of the Sunfish mast. Includes fasteners for easy installation. Fits into the base of the Sunfish mast Identical to the OEM mast base fitting Black plastic