Complete Rudder Head for the RS Aero. Includes Rudder Head, Tiller, and Tiller Extension.

Rudder Blade for the RS Aero. Comes pre-drilled with holes for both rudder bushings and centerline hole for downhaul line. Part numbers for the rudder bushings are: AER-FO-901 and AER-FO-902.

Bushing through the rudder which is used to secure the rudder blade to the rudder head on the RS Aero. Attach to the rudder head with screw and nut, whose part numbers are FIX-B6-40 and FIX-N6-006, respectively.

The rudder downhaul line for the RS Aero. This line passes through the pre-drilled hole in the rudder centerline and is knotted off through this bushing, providing leverage. (Gives the rudder downhaul line something to pull against).

Padded rudder bag for the RS Aero.

Righting Line Kit for the RS Aero. Line attaches to the same anchor point as the side deck under gunwale fairleads, this in turn is connected by a pulley to a bungee which runs through the bow under gunwale fairlead. Provides easier access/leverage for...

This premium kit was developed by 2017 RS Aero World Champion and the 'Boat Whisper' himself Steve Cockerill of Rooster Sailing, and contains all the components you need convert your RS Aero to over deck control lines. You will require a needle fid and...

Strop line connecting Ronstan Shock Blocks in the over deck control line upgrade for the RS Aero. Passes through gunwale from forward to aft holes.

Carbon Tacktick or Velocitek Prism Mounting Bracket for the RS Aero. Attaches to deck button, whose part number is: RSM-HF-902. Designed for RS Aero RS Part Number AER-UA-102

Mast Track for the Aero Mainsail. Attaches using glue and one rivet. whose part number is: RSM-MS-301, at the top. Sold in 1 meter lengths of track.

Designed to fit older RS Aero's without the deck ring fitted. Installation instructions: https://www.rssailingstore.com/files//9a07106b-eb7c-4f8e-bcdb-a86900fa9e67/Aero%20instructions%20-%20MAST%20POT%20UPGRADE%20V2.pdf

Mast Step for the RS Aero. This is the actual collar that sits into the deck into which the mast is stepped. Screws to the deck using two screws whose part number is: FIX-S10-C34.

Mast Base Plug for the RS Aero. End Cap/Plug which fits into the bottom of the Aero Mast.

Plastic collar that fits onto the lower mast. Serves as the wear surface between the mast and mast step ring/collar, whose part number is: AER-HF-201.

Fitting on the RS Aero Mast that routes the halyard. Prevents the halyard from uncleating due to mast bend when the sail is under load.

Kit used to upgrade original RS Aero mainsheet base to a mainsheet swivel cleat. The kit includes a Harken swivel cleat assembly with hardware and spring. Use your existing mainsheet block in this assembly.