Stainless steel mast tang for Hobie 16, Hobie 17, and Hobie 18 catamarans. RESOURCES & SUPPORT Hobie Cat Parts Locators Hobie Cat Rigging Guides Shop All Hobie Cat Parts

Cradles distribute the boat load over 400 sq. in. of the hull to assure there are no excess stresses while carrying. Recommended for Wildcat, H18, H20, and Hobie 16. Can be used on Hobie Getaway or Hobie Wave, but long term storage of rotomolded boats on...

Replacement back frame assembly for Hobie Vantage kayak seat.   RESOURCES & SUPPORT Hobie Cat Parts Locators Hobie Cat Rigging Guides Shop All Hobie Cat Parts

Replacement tiller arm for the Hobie 16. Made from aluminum. RESOURCES & SUPPORT Hobie Cat Parts Locators Hobie Cat Rigging Guides Shop All Hobie Cat Parts

This is a forestay for those Hobie 16s using the Aussie jib halyard system. This replaces the forestay wire found in the Aussie upgrade kit, or can be used to upgrade your jib halyard system. Use with Hobie 16 Aussie Jib Halyard system. Measured at 225...

Replace the rudder cam and flared pin with this kit that includes a pair of cams and a pair of binding post screws. Fits the Hobie 17, Hobie 18, and Hobie 20.   RESOURCES & SUPPORT Hobie Cat Parts Locators Hobie Cat Rigging Guides Shop All...

Hobie Mirage Drive 180 V2 replacement fin. Hobie Part Number 81500 Previous Hobie Part Number 81500002   RESOURCES & SUPPORT Hobie Cat Parts Locators Hobie Cat Rigging Guides Shop All Hobie Cat Parts

Highest quality aircraft stainless wire coated with UV tolerant black vinyl coating for all of Hobie's wire products. Molded nylon handles are installed at the right place for easy in and out maneuvering. Also available in kits which include the trapeze...

Brand new carbon tiller from the iconic Dwyer Mast and Rigging! Classic design that works. Small cleat on the port side of the tiller and a wrap around metal plate to protect the carbon fiber from traveler chafe.  Carbon tiller for the ILCA...

Hike hard for longer with our highly durable Nylon and Rubber constructed ILCA / Laser dinghy strap. Lock into the dynamics of your boat with great grip at any angle or position. Position - skipper Length - 810mm Width - 80mm End 1 - loop End 2 -...

Pro Rudder with Tiller and Extension from Fighter Foils. This race ready rudder assembly is build for the active Optimist racer and compatible with all racing hulls. Built to the strictest IODA standards.  Perfect hydrodynamic profile and smooth...

Fighter's top-of-the-line daggerboard meets the strictest IODA standards. This is the Fighter 'Flex' daggerboard, designed for athletes under 40kg (88lbs).  From Fighter:  "Perfect hydrodynamic profile and smooth finish provides a reduction...

Fighter's top-of-the-line daggerboard meets the strictest IODA standards. This is the Fighter 'Flex' daggerboard, designed for athletes over 40kg (88lbs).  From Fighter:  "Perfect hydrodynamic profile and smooth finish provides a reduction...

The new Harken Power3 ratchet blocks provide sailors that race small one-designs with three holding-power options to handle a variety of wind and sea conditions. More choices allow sailors to fine-tune their set-ups in tandem with the purchase that...

A low-friction Harken 29mm Carbo AirBlocks from Harken. A lightweight, strong, reliable and affordable block. This variation comes with a removable bolt through the middle so it can be undone and connected to various locations on your boat...

The ILCA Daggerboard Friction Pad MK2 is screwed to the back of your Daggerboard casing and allows for perfect grip and slip ratio when raising the board. The New and Improved design lets you replace the Rubber Pad housed inside the Plastic Casing...