The Carbo Ratchamatic is a load-sensing ratchet block that rolls freely in both directions under low loads and automatically engages the ratchet as loads increase. Shifting between ratchet and light-air modes is seamless. ONE DESIGN APPLICATIONS This...

The Carbo Ratchamatic is a load-sensing ratchet block that rolls freely in both directions under low loads and automatically engages the ratchet as loads increase. Shifting between ratchet and light-air modes is seamless. ONE DESIGN APPLICATIONS This...

Harken 13 mm control blocks spin on stainless steel balls that roll freely under high loads. These traveler car locks are used to create a 2:1 purchase for controling larger traveler systems. Sheave - 16 mm / 5/8 in Maximum line - 5 mm / 7/32 in Maximum...

Complete screw-in drain plug assembly by Holt Allen. Screw-in plug Housing screw hole spacing: 38mm / 1.5 inch Plug hole diameter: 22mm / 0.88 inch Includes housing and plug Color: Black Manufacturer: Allen Part Number: A.423 Some use...

This is a standard bow shackle used commonly on the 420, FJ & V15 and as a mast bail on 3:1 purchase 420 vangs. It is an excellent shackle for all-around use with screw pin included. HAR 2110 1/4 inch / 6mm diameter screw pin for easy...

This is an upgraded 15:1 purchase boom vang for Laser® sailboats. This complete vang assembly includes all blocks and line for a quick installation. This vang is not class legal for racing but ideal for training or recreational use. Complete...

Use the 237 and 339 where there is little deflection in the line such as when routing a spinnaker pole foreguy aft along the cabin house. Use with Harken 241 cam base. A (mm)32 mm A (in)1 1/4 in B (mm)38 mm B (in)1 1/2 in Fasteners (mm)5 RH...

Thru Deck Gunwale Bushing for the 29er. Made from Nylon.

Harken two way link enables you to mount a Harken main sheet block to a swiveling base plate. This improves flexibility and makes it easier to trim the mainsail. Designed to connect EX1410 swivel base plate with ratchet block. Includes two clevis pins...

The Allen 20mm Micro Hook Block is deal for dinghy control systems where a quick release is necessary. Great for ILCA / Laser outhaul clew, Tasar halyards, and other small boat halyards that use a fine tune adjuster. Ball Bearings Micro single block...

The Harken Swivel Cam Cleat is a simple swivel base for main and jib sheets on small sailboats. Includes a swivel base, bullseye fairlead, and standard Harken cam cleat. The base rotates 360 degrees making it easy to cleat and un-cleat from any angle...

29mm 90 Degree Traveler Blocks from Harken. 29mm Two single blocks at 90 angle for use with traveler applications Made by Harken

These rubber "O" rings are part of the Sunfish Bailer, placed between the hull and the bailer housing to create a nice seal. Available in a 5 pack so you'll have spares. Pack of 5 rubber rings Class legal for the Sunfish Fits both the 1-5/16 and 13/16...

The Tiller Joint Universal connects a tiller extension with a tiller. The flexible rubber allows for a full range of motion with the tiller extension. New tiller extensions come with a joint universal, so you can use this one to replace one that has...

Harken cam cleats utilize a system of multiple rows of ballbearings allowing the line to be cleated by snapping down rather than drawing through. The cams are design to provide maximum holding power without destroying the line. This includes smooth...

Large stainless eyestrap from Harken. ONE DESIGN APPLICATIONS This fitting is commonly used and/or recommended for the following one design sailboat applications: J/22 Traveler Block Eyestrap (x2)