Melges 24 Rigging

Our Melges 24 Main Halyard is made with 5mm Vectrus 12 (vectran) for the primary halyard section that is eye-to-eye spliced with 5mm Amsteel Blue (dyneema) for the hoisting tail. We build this halyard to just the right length for attaching your 4:1 fine...

Our Melges 24 Jib sheets are continuous and tapered. This option is made from Admiral 5000 by Robline, a high performance line with Dyneema SK78 core for limited to no stretch and 24 Plait Polyester cover for durability. Ideal for the active racer...

The Melges 24 backstay bridle is made with eyes at either end, one luggage eye and one standard eye, using 5mm Amsteel AS-78 for super low stretch and top performance. Recommended length by class experts so you can be sure of a great fit on your Melges...

This is a high performance Melges 24 Main Halyard with end whip and a reeving eye on the tail for easy installation. This option is made from Marlow D2 Racing, a pre-stretched, bio-based double braid line that is a great high-strength and lightweight...

The Melges 24 Backstay Control Line is cut to a recommended length for most rigs and finished with an end whips on both dead ends for extended durability. Made from 6mm Marlow Excel Racing, with a Dyneema SK-78 core for low stretch and a 16 plait...

Our Melges 24 Tack Line made from 8mm Marlow D2, which features a Dyneema SK-75 core for negligible stretch with a durable polyester cover. Finished with End Whips for durability. An awesome performance upgrade for any Melges 24 sailor! Line:...

A performance option for our Melges 24 Tack Line, this version is tapered to reduce weight and increase efficiency. We taper the Admiral 5000 line to remove the 24-plair cover and expose the Dyneema SK-78 core in the forward part of the tack line. The...

Our Melges 24 Furler Line is whipped on both ends for durability and cut to the perfect length for your furling system. Made from Marlow Super Pre-Stretch, 100% polyester single braid line that is pre-stretched to improve strength and reduce elongation ...

Our Melges 24 Bow Sprit Line is made from 6mm SSR, featuring 16 Plait Dyneema SK-75 and Cordura Blend that provides top performance with end whips for durability. 6mm SSR Dyneema/Cordura Blend End whips Part Number M24340 Click here for Melges 24...

A complete spinnaker sheet for the Melges 24 made from Marlow D2 Race, which features a SK-78 12-Strand Dyneema core with 24 Plait Polyester cover. This is a continuous spinnaker sheet with a bury/taper on each end to expose 8 feet of core. We...

The Melges 24 continuous spinnaker sheet is a 8mm single length of line with eyes on each end with an included 5mm dyneema tail w/ loop for luggage tagging the two ends of the sheet together and tying to the clew of the spinnaker. Our Ultra-Lite...

The Melges 24 Spinnaker Halyards are available both tapered or Non-tapered. This tapered version has a reeving splice on one end (for easy install to a clutch/cleat) and is tapered/buried on the other end (spinnaker head) with an end whip for...

The Melges 24 Spinnaker Halyards are available both tapered or Non-tapered. This non-tapered version is made from Marlow Super Pre Stretch, a 100% polyester single braid line that is pre-stretched to improve strength and reduce elongation. Each end...

For use with a fixed forestay system, this Melges 24 jib halyard is made with no-stretch 5mm Samson Vectran. We link the Vectran to a 6mm SSR tail with two eye splices and end with the tail for durability. Color option is for the tail portion of the...

The Melges 24 Continuous Traveler Line is whipped on both ends for a clean finish. This option is made from 6mm Marlow Super Pre-Stretch, a 100% Pre-stretched Polyester provides slight stretch with low water absorption; runs quickly. Great for the...

The Melges 24 Continuous Traveler Line is whipped on both ends for a clean finish. This option is made from 6mm SSR, a single braid blend of Spectra and Cordura makes this line both durable and soft in the hand. Very similar to Maffiloli Switfcord...