GoPro Mounting base on 1 inch ball for Hobie RAM mounting system.   RESOURCES & SUPPORT Hobie Cat Parts Locators Hobie Cat Rigging Guides Shop All Hobie Cat Parts

1/4 inch x 1-1/4 inch stainless steel clevis pin with zinc finish from Ronstan. Features a 1-1/4 inch grip length (distance between cap and pin hole) and 1-7/16 total pin length. Pin Diameter is 1/4 inches Pin Grip Length is 1-1/4 inch Sold individually...

Replacement deck mounted cheek block for use on Hobie kayaks.

Hobie Fishfinder battery holder to keep your battery secure.   RESOURCES & SUPPORT Hobie Cat Parts Locators Hobie Cat Rigging Guides Shop All Hobie Cat Parts

Replacement bullet block with beck for Laser sailboats. The bullet block with becket is attached to the aft end of the boom. Run your mainsheet aft, through this block, down to the traveler block and back up, tying off to the becket. Not class legal for...

Hobie Kayak Fishing decal in White. Measures 12 inches wide.

Tool to install Hobie kayak deck fasteners 71117001, 71116001, etc.

Specifically designed for halyard applications, these shackles feature a closed eye section at the top to retain the halyard at all times and a captive shackle pin to avoid accidental dropping and loss. The halyard retaining pin is removable to allow...

Black anodized tiller & extension comes with deluxe universal joint, which can be removed if needed and the internal rope core strengthens the joint. Black anodized aluminum tiller and extension Deluxe universal joint allows extension to be...

Complete assembly to replace the pivot bolt, nut and washers for the centerboard on an LP or ZIM C420 or FJ. Stainless steel fittings Includes rubber washers FJ and 420 Zim Part # 20271 / Laser Performance Part # 85016  

Plastic protector for Hobie Cat sail for the front of the jib battens . Replaces worn out luff protector and includes brass rivets to install. RESOURCES & SUPPORT Hobie Cat Parts Locators Hobie Cat Rigging Guides Shop All Hobie Cat Parts

Cable gland for Hobie Evolve Torqueedo M12 motor.

Pulls over boom and sail like a sock. Open end closes with a drawstring and nylon clasp. Material and color may vary. For the Hobie Wave.  RESOURCES & SUPPORT Hobie Cat Parts Locators Hobie Cat Rigging Guides Shop All Hobie Cat Parts

Hog rings can be crimped to secure two pieces of line or a single line in a loop. Commonly use for making shockcord loops on small sailboats. 3/8 inch stainless steel hog ring. Works for up to 3/16 inch or 5 mm diameter line.

Bow spreader plate for Hobie Getaway sailboat. RESOURCES & SUPPORT Hobie Cat Parts Locators Hobie Cat Rigging Guides Shop All Hobie Cat Parts

Track used for the jib sheet blocks on the Hobie 16. Works on port or starboard side of front crossbar and installed with rivets. 6 hole track Requires (6) 3/16 X 3/8" CSK Rivets (Part Number 8010201) Also used as a Hobie 18 jib track (port or...