The grab rail used on the RS Aero and the new style RS 200. This grab rail measures approximately 63cm.

Replacement Gooseneck Spigot for the RS Aero. Connects the boom end plug to the Gooseneck Assembly. Does not come with screw in photo (see part 24982)

Only the pigment is supplied. Clear gelcoat and catalyst will need to be purchased separately. Due to some tricky and expensive hazards goods rules around shipping, in most case these items will need to be sourced locally. 20g of RS Pigment mixed into...

Centerboard case gasket fluff for the RS Aero. Glued into the centerboard case to give the daggerboard a good tight fit, but it is also low friction so the board can still be easily pulled in and out.The item width is 13mm. Sold per meter. Also used on...

Selden Block Tie Deck Organiser for the RS Aero. Used on the Port side of the Mast Step to mount blocks for the outhaul and to secure the daggerboard bungee line. Used on the Starboard side of the Mast Step to mount blocks for the downhaul and vang.

The standard batten tip/batten cap used for the battens in the RS Aero & RS Neo mainsails, plus the key used to tension the battens. Adjust batten tension by turning the hex screw in the batten tip.

Batten set for the RS Aero 7 Sail.

Batten set for the RS Aero 5 Sail.

Transom Bung for these RS boats: RS Tera RS CAT 16 RS Quba RS Feva RS Neo RS Vision Also used as cockpit bung on RS Tera.

#8 x 3/8 PHSMS PH SS screw from Hobie Cat.   RESOURCES & SUPPORT Hobie Cat Parts Locators Hobie Cat Rigging Guides Shop All Hobie Cat Parts

10-16 x 1-1/2 SELF-TAP screw from Hobie Cat.   RESOURCES & SUPPORT Hobie Cat Parts Locators Hobie Cat Rigging Guides Shop All Hobie Cat Parts

Small single block with a variety of applications on various Hobie sailboats and kayaks. Made by Hobie Cat.   RESOURCES & SUPPORT Hobie Cat Parts Locators Hobie Cat Rigging Guides Shop All Hobie Cat Parts

Swivel cleat bases permit easy cleating and releasing from any angle. Dead eyes contain stainless steel liners for low friction and long life. Cleating plates are heavy gauge alloy for stiffness and minimum distortion under load. Great for sheet leads...

Intensive development efforts have produced this range of cleats that provide unbeatable holding power, yet are designed for easy cleating and releasing of control lines in every application and load condition. Through the use of advanced composites,...

The Ronstan 15 mm Utility Block range offers small boat sailors a lightweight, stainless steel block range for a variety of applications such as control lines and shockcord tension systems. This is the basic loop head type single block, great for lashing...

Simple, easy to carry, and easy to use. Comes complete with no-rot canvas bucket, premeasured line, shoulder pad (not shown) and snap. The righting bucket holds as much as 150 pounds of water to assist your body weight to right your catamaran.  ...