32mm eye strap for ILCA dinghies.

Complete autobailer assembly for the ILCA dinghy with bailer plate, chute door, bung, and screw. This is a class legal bailer with ILCA stamp on body of the bailer, and found on new production boats. Designed to be a direct replacement part for existing...

Replacement autobailer bung for the ILCA autobailer assembly. This bung attaches to the rod that controls the bailer chute door. Pull it forward to open the bailer, push it shut to keep water out.

Replacement o-rings for the ILCA autobailer assembly. Available in a convenient 2 pack.

Complete Deck Cleat Plate assembly with Harken cleats and fairleads. Attaches to the ILCA dinghy deck with two screws and used for cleating your outhaul and cunningham lines that run back from the deck blocks mounted behind the mast.

The Deck Cleat Plate is a replacement base for the deck cleat assembly on all ILCA dinghies. This plate does not include cleats or fairleads.

The deck blocks plate is mounted just aft of the ILCA mast step and is a mounting point for two turning blocks for your outhaul and cunningham lines. This is the complete deck blocks plate assembly includes two Harken 16mm air blocks and is standard on...

The deck blocks plate is mounted just aft of the ILCA mast step and is a mounting point for two turning blocks for your outhaul and cunningham lines. This is the plate only, handly for replacing an old plate or for upgrading with your own favorite blocks.

Standard aluminum fairlead for the ILCA dinghy traveler. Attach one on each side of the transom deck.

The Bow Eye Fairlead is mounted on the bow of the ILCA dinghy and serves as a tie down point or place to attach your daggerboard retaining line.

Replacement base assembly for the Harken ILCA / Laser vang assembly. Stainless steel with integrated cleat and turning points. Made by Harken ILCA Class Approved

The vang key attaches to the upper vang block and slides into the boom vang plate that is mounted on the ILCA / Laser boom. It provides a quick but solid connection for easy rigging and unrigging, holding position while under tension. This is the latest...

The ILCA / Laser Harken Vang Assembly is a very popular ILCA dinghy upgrade. It features a 15:1 purchase, making fine-tune adjustments much easier and smoother. Kit includes base unit, top block, double block w/ becket, dyneema primary line, purple...

Stainless steel eyestrap for mounting boom blocks on the ILCA dinghy or Laser sailboat boom. Attaches with two rivets sold separately. Stainless steel Installs with two 3x16 x 1/4 inch rivets Use to attach the boom block (mid boom) or boom block with...

The Boom Vang Plate is attached to the forward section of the boom and has a slot for the vang key to slide into, forming the upper connection of your boom vang assembly. Stainless steel Attaches to lower side of forward end of boom Works on any ILCA...

The Boom Gooseneck Plug mounts to the forward end of the boom and has a hole to accept the stainless gooseneck fitting. Attaches with rivets. Plastic fitting Fits any ILCA dinghy or Laser sailboat boom Install with a 3/16 x 1/4 rivet (not included)