Wear surface at the stern of the RS Quest hull. Along with the hull rail handles helps to reduce wear on the hull. Attach using two screws. The part numbers for the hull rail handles and screws are QUE-HF-307 and FIX-S8-C03, respectively.

Hook casting for securing the Jib Tack on the RS Quest. Connects to the Tack Plate using a 20mm clevis pin. The part numbers for the tack plate and 20mm clevis pin are QUE-HF-104 and ST-O0620, respectively.

RS Quest Furler Tack Plate. Attachment plate to bridge the gap between the tack bar, the forestay shroud lever, and the jib tack hook. Attaches using 1x 20mm clevis pin and 2x 10mm clevis pins. The parts numbers for the tack bar, shroud lever, tack hook,...

Top swivel for the RS Quest Forestay.

Forestay for the RS Quest. Comes with Jib Attachment Swivel and Forestay top strop. Excludes top swivel.

RS Quest Foredeck Pins. Attach using 2x screws, whose part number is FIX-B5-C12.

Foredeck for the RS Quest. Attached using 2x screws and washers. Part number for the screws is FIX-B6-B50. SPECIAL ORDER - Availability and Freight Shipping Information This item is classified as FREIGHT due to weight and/or length and is a...

Centerboard friction tube for the RS Quest. Prevents the centreboard from come up when sailing. Does not include plate or screws, whose part numbers are A4099 and FIX-S10-P02, respectively. Also used on the RS200, RS400, and RS500.

Thru-deck line bushing used on the RS Quest Bow and Transom.

Boom end deck protector for the RS Quest. Riveted to the end of the boom. Provides a wear surface on which to rest the unrigged boom so it doesn't damage the deck or the boom itself.

RS Quest Seats (Pair). Extends the coaming to provide crew seating. Install using 3x screw caps, 3x bolts (M5 Threaded Bar 87mm), 3x washers. Part numbers for the screw caps and washers are QUE-FO-901 and FIX-W5-002, respectively.

Batten Adjuster made by China Sail Factory. Used to adjust the mainsail battens on the RS Quest.

Seasure low saddle eyestrap.Used on the RS700 mast to attach trapeze wires.

Top section end plug for the RS Quba. Also used on the RS Zest.

Mast Join Collar/Top Section Connector Sleeve for the RS Quba. Also used on the RS Zest.

Selden Untapered Mast Head Sheave Box. Used on the RS Quba, RS Quest, RS Venture S & SE, RS Venture Connect.