General Parts

This shackle is used primarily to attach jib halyard to head of jib sail on 420, FJ, and V15. Supplied by Zim Sailing. Captive locking pin Easy twist and release Part Number 20030 Previous LP Part Number 90570 One Design...

The side entry fairlead allows ropes to be hooked in for cleating, yet easily removed. This is a great cleat for spinnaker sheets on smaller sailboats. Notched cutout on port side of cleat. Lightweight Aluminum construction Mounts easily to deck Notched...

Long dee shackles have a longer internal length clearance for fitting to longer or irregular shaped objects with a greater distance between fixing points, such as attaching an outhaul line to a press ring on a sail. A: 4.0 mm B: 26.0 mm C: 10.0 mm P.L...

This is a trapeze cleat for a spinnaker and trapeze rigged 420. The integrated block allows for additional purchase. This cleat provides a quick and solid lock that is easy to release, making it the preferred choice for adjusting trapeze lines. ...

1/4 inch x 1-1/4 inch stainless steel clevis pin with zinc finish from Ronstan. Features a 1-1/4 inch grip length (distance between cap and pin hole) and 1-7/16 total pin length. Pin Diameter is 1/4 inches Pin Grip Length is 1-1/4 inch Sold individually...

Specifically designed for halyard applications, these shackles feature a closed eye section at the top to retain the halyard at all times and a captive shackle pin to avoid accidental dropping and loss. The halyard retaining pin is removable to allow...

Black anodized tiller & extension comes with deluxe universal joint, which can be removed if needed and the internal rope core strengthens the joint. Black anodized aluminum tiller and extension Deluxe universal joint allows extension to be...

'Ring dings' or 'split rings' prevent pins from falling out on the boat. These rings are a 5/8 inch diameter and sold in 10 pack. Material - Stainless Steel Diameter - 5/8 Inch Packaging - 10 Pack

Pack of six (6) stainless screws for installing any inspection port. These short screws are just long enough to tap into your deck and prevent the hatch from twisting. Use sealant when installing screws for full waterproof protection. Stainless screws...

Harken cam cleats utilize a system of multiple rows of ballbearings allowing the line to be cleated by snapping down rather than drawing through. The cams are design to provide maximum holding power without destroying the line. This includes smooth...

Trim your sails for optimum performance. Attached air flow over sails is critical. Air flow directions are indicated by these tell tails. Made of light weight rip stop nylon (Red/Green). Attaches to sails with waterproof adhesive disks. Waterproof...

Large stainless eyestrap from Harken. ONE DESIGN APPLICATIONS This fitting is commonly used and/or recommended for the following one design sailboat applications: J/22 Traveler Block Eyestrap (x2)    

57mm Single Swivel Block from Harken. 57mm Single Block

Standard size 3/16" x 1/4" aluminum rivets . Rivets secure fittings, caps, and eye straps to aluminum spars. 10 Pack 3/16" x 1/4" Aluminum

1/4 inch x 3/4 inch stainless steel clevis pin with zinc finish from Ronstan. Features a 3/4 inch grip length (distance between cap and pin hole) and 29/32 inch total pin length. Pin Diameter is 1/4 inches Pin Grip Length is 3/4 inch Sold individually...

40mm Carbo Fiddle Block from Harken. 40mm Fiddle block with a becket Made by Harken ONE DESIGN APPLICATIONS This fitting is commonly used and/or recommended for the following one design sailboat applications: J/22 Vang Floating Block (x1) Sonar Lower...