General Parts

Marine Tex White - The Mighty Repair Kit! This easy to use heavy-duty structural epoxy is a go to for a variety of repair projects. It handles like putty, hardens like steel, sands like wood - bond to properly prepared wood, steel, aluminum or fiberglass...

Track is extruded from high-grade 6061-T6 aluminum and hardcoat-anodized for a hard, long-lasting surface. Length (m)1.5 m Length (ft in) 4' 11 1/16" ft in Weight (g)645 g Weight (oz)22.8 oz Fasteners (mm)5 FH mm Fasteners (in)#10 FH in Mounting hole...

Cunningham and Outhaul Upgrade kit for Laser sailboats. Includes a 6:1 Outhaul and 10:1 Cunningham, all led directly to deck blocks & cleats. Additional purchase creates a mechanical advantage for much smoother operation with less effort. Mounts to...

The Harken Tiller Extension is a light weight aluminum tiller extension that attaches to most tillers. Available in several lengths to match boat type or preference. All extensions include universal joint and base for mounting on existing tillers. The...

The Tasar Hand Holds mount inside the cockpit and allow both skipper and crew to move in from hiking or roll tacking. Watertight, seals flush to cockpit Made by Harken Width: 5-3/4" (14.6cm) Height: 3-1/2" (9cm) Fastener Size: #10 (5mm)

These fittings attach to each end of a spinnaker/whisker pole. Fits standard 420 and FJ spin poles with 1 inch diameter. Fits most 1 inch outer diameter poles. Includes Metal jaw w/spring. inside Diameter: .9 inches. Zim Part # 20183 / Laser Performance...

29mm Carbo Triple Block w/ Cleat from Harken. 29mm Triple block configuration with cleat Made by Harken

Spinnaker pole bracket for the Velocitek Speedpuck. Perfect for catamaran sailors. Spinnaker pole bracket esigned for catamarans. Mounts securely on spinnaker pole with duct tape. Made from durable epoxy and weighs only 2.5oz. Includes a rectangle of...

This shackle is primarily used to attach the jib halyard block to the mast hounds assembly. Includes Clevis Pin and Ring

22mm Micro Cheek Block from Harken. 22mm Mount a deck or similar Made by Harken

4 inch inspection port by RWO. Allows you to gain access to the interior of the boat without compromising hull integrity. Fits cat bag for storage! Includes outer bracket, inner lid, and o-ring seal Does not include installation hardware - see notes...

3/16 inch x 1/2 inch stainless steel clevis pin with zinc finish from Ronstan. Features a 1/2 inch grip length (distance between cap and pin hole) and 5/8 inch total pin length. Pin Diameter is 3/16 inches Pin Grip Length is 1/2 inch Sold individually...

Dynamic Dollies & Racks specialize in storage solutions for small sailboats. This multiboat storage rack is designed to hold 4 small boats such as Lasers, Sunfish, 420s, FJs, RS Fevas and more. Need a Custom Rack? Send an email to...

Wedge kits and risers are available to improve the angle of your cams. Under deck shims are included with angled risers and wedges for easy mounting. Height (mm)28 mm Height (in)1 in Length (mm)65 mm Length (in)2 9/16 in Width (mm)32 mm Width (in)1 1/4...

This fast pin allows for quick detachment of 3/16" fittings, even under pressure. Common on Lasers for the cunningham block connection and it is also secures the Holt vang to the mast vang tang. The diameter (3/16") is smaller than the original pin...

The mainsheet spring keeps the mainsheet block upright, making it easier to sheet and preventing the line from kinking. Use on a variety of small sailboats. Stainless Steel 2 inch Tall