General Parts

The horn cleat is perfect for tying off halyards securely. Used on a variety of small sailboats, including the Sunfish for securing the main halyard. 3-3/4 inch length. Black anodized aluminum. Commonly found on Sunfish deck for main halyard cleating.

6" inspection port from Beckson that allows you to gain access to the interior of the boat. The Beckson Screw-Out Plate incorporates a self-aligning center and an innovative gasket to assure a watertight seal. A patented back-up sealing wall leaves the...

Set of hiking straps for the 29er. Set of two straps, sewn in rear, loop on other end Length: 61 inches each Padded for comfort Made by Fast Canvas

Harken ball bearing cam cleats hold lines securely and release instantly for easy, precise trimming. Aluminum Cam-Matics are hardcoat-anodized for high-load, high-wear, continuous adjustment applications.. Height (mm)22 mm Height (in) 7/8 in Length...

1/4 turn key style drain plug by RWO.  If your existing drain plug housing does not have threads, this is the drain plug you want to buy. If your housing has threads, please take a look at our other drain plug offerings. 1/4 turn design - not a...

The X-Treme Angle Fairlead allows releasing and recleating at angles up to 90 degrees. Add to a standard Harken cam cleat (not included). ONE DESIGN APPLICATIONS This fitting is commonly used and/or recommended for the following one design sailboat...

38mm Big Bullet Block w/ Swivel from Harken. 38mm Single Swivel Block

Forged stainless steel shackles are polished to a high luster and are stamped with the screw pin diameter. This shallow bow shackle shape is best for multidirectional loads and proportionally wider for their length than regular bow shackles. Shackle...

The clatter-free rubber boot is great for keeping pesky mainsheet stand up springs from grabbing hold of lines in the cockpit. Ronstan RF2455

Standard size 3/16" x 1/4" stainless steel rivets in a 10 pack. Rivets secure fittings, caps, and eye straps to aluminum spars. 10 Pack 3/16" x 1/4" size Stainless Steel

This retaining clip works well for securing rudders and large pins. Great for the Tasar and Moth. Quick and easy to attach plus you can tie it in! Sold individually Stainless steel 3/32" thick 5/8" Diam.

The standard dimensional format shackle provides high load capacity with a compact size. A: 4.8 mm B: 18.0 mm C: 11.0 mm P.L. B.L.: 800 kg U.D.L. B.L.: 1400 kg Weight: 15g

An all-purpose, non-corrosive, non-yellowing, mildew resistant, low-odor, 100% marine high quality silicone sealant. Tack-free in 30 minutes or less. *Fully cured in 24 hours. For use above or below the waterline. Will not shrink, crack, or dry out...

Hiking Straps for both the skipper and crew. Made to be durable yet soft for both long life span as well as comfort. New Custom Design Grommet to keep crew straps level Class Legal Lengths: 38 inches / 33 inches

All in one premium V15 cover designed for highway travel, off-season storage and mast-up dinghy lot storage. Available in Seagull Gray with Black Trim. The highest quality cover was designed for highway travel, off-season storage and also for...

The X-Treme Angle Fairlead allows releasing and recleating at angles up to 90 degrees to the cleat. Kit includes lightweight, fiber-reinforced 471 Carbo Cam and 476 Extreme Angle fairlead. Includes cam 471 Includes fairlead 476 Weight (g)47 g Weight...