General Parts

Pack of six (6) stainless screws for installing any inspection port. These short screws are just long enough to tap into your deck and prevent the hatch from twisting. Use sealant when installing screws for full waterproof protection. Stainless screws...

A premium V15 hull cover. This roadworthy cover fits great and installs easily with a preset bungee. Designed for a V15 being stored or transported upside down. Available in Seagull Gray with Black Trim. Roadworthy cover fits great and installs...

Harken cam cleats utilize a system of multiple rows of ballbearings allowing the line to be cleated by snapping down rather than drawing through. The cams are design to provide maximum holding power without destroying the line. This includes smooth...

Trim your sails for optimum performance. Attached air flow over sails is critical. Air flow directions are indicated by these tell tails. Made of light weight rip stop nylon (Red/Green). Attaches to sails with waterproof adhesive disks. Waterproof...

This is a rolled sailbag for 420, FJ, ov V-15 main and jib or a complete Opti rig. Blue fabric with carrying handle Measures 100" long by 15" tall (when flat) Fits 420, FJ, and V-15 main and jib rolled, or complete Optimist rig (a touch big, but works)...

Padded Blade Bag for 29er, 49er, and Tasar Sailboats. A custom bag that fits 29er, 49er, and Tasar foils safely and securely. Full length zippered from pouch with mesh to store lines and accessories. Individual padded pockets for a rudder and...

A single sided tree rack designed for 2 kayaks or canoes from Dynamic Dollies. Single sided tree style storage rack Fits two (2) kayaks or canoes Aluminum tubing with reinforced plastic joints Ships in a box and is easily assembled   Oversize...

Heavy duty deck cover that protects your boat in all conditions. North Winds Canvas Gorge Series Covers The Gorge Series from NWC represents the finest in covers available for your boat. Handmade to order right here in Portland, all Gorge Series covers...

Large stainless eyestrap from Harken. ONE DESIGN APPLICATIONS This fitting is commonly used and/or recommended for the following one design sailboat applications: J/22 Traveler Block Eyestrap (x2)    

57mm Single Swivel Block from Harken. 57mm Single Block

The FJ sailboat top cover is designed for mast-up dinghy lot storage of an FJ with the boom in sailing position. Perfect for high school or college boats! Available in Seagull Gray with Black Trim. There is no better value in an FJ cover on the...

Standard size 3/16" x 1/4" aluminum rivets . Rivets secure fittings, caps, and eye straps to aluminum spars. 10 Pack 3/16" x 1/4" Aluminum

1/4 inch x 3/4 inch stainless steel clevis pin with zinc finish from Ronstan. Features a 3/4 inch grip length (distance between cap and pin hole) and 29/32 inch total pin length. Pin Diameter is 1/4 inches Pin Grip Length is 3/4 inch Sold individually...

This stainless steel eyestrap provides the attachment point for the boom blocks on the 420, FJ, V15, and Laser. Original Equipment Stainless Steel 40mm Hole Spacing 19mm Eyestrap Height

The fine tune stay adjuster provides for a quick and easy way to adjust stay tensions. It greatly reduces the risk of losing the stay when adjusting rig tension. 316 stainless steel Pin - 3/16 inch Increment Length - 5/32 in. Qty. Adjustment Settings -...

40mm Carbo Fiddle Block from Harken. 40mm Fiddle block with a becket Made by Harken ONE DESIGN APPLICATIONS This fitting is commonly used and/or recommended for the following one design sailboat applications: J/22 Vang Floating Block (x1) Sonar Lower...