RS Sailing Parts

Outboard End Cap for the RS Venture Bowsprit. Attach using 1x rivet, whose part number is FIX-R48-M12.

Bowsprit for the RS Venture.

Wear strip which reduces wear to the mast step on the RS Tera.

Mast Deck Plate for the RS Tera. The deck collar locks into the mast deck plate, preventing the mast from unstepping. Attach using 6x screws, whose part number is FIX-B6-C20.

Gudgeon for the RS Tera. Two are required per boat. Attaches to the transom using 2x screws per gudgeon. Sold individually. The part number for the screws is FIX-B6-P16.

Plastic trapeze handle used for trapeze systems on the RS Quest. Can be used for many other pulling operations. 2.5mm hole at the top. Tap can be cut to create a bigger hole.

Spacer/Bushing used on various RS Sailing roto sailboats between the transom and the transom plate. The part number for the transom plate is QUE-HF-503.

Selden External T-Terminal Tang. Used on the RS Quest.

Bow Tube for the RS Quest Bow Sprit/Spinnaker Pole. Allows the Spinnaker Pole to be extended/retracted through the bow.

27mm Fairlead by Selden. Used on the RS Quest to fair the spinnaker halyard as it runs down the centerline between the two 30mm ball bearing blocks. The part number for the blocks is P403101SLC. These blocks are an optional upgrade on the RS Quest.

Transom plate for the RS Quest. Used for mounting the upper and lower gudgeons. The part numbers for the upper and lower gudgeons are C16-HF-502 and RSM-HF-506, respectively.

Forward Beam Assembly for the RS Quest. Includes mast step. Attaches using 2x screws and caps. The part numbers for the mast step, screws, and caps are QUE-HF-200, FIX-B6-P16, and QUE-FO-901, respectively.

Mounting Plate for the Mainsheet Hoop when this is installed on the RS Quest. Two are needed to install the mainsheet hoop. Attach using 3x screws each, whose part number is FIX-B5-C12.

Hoop Blanking Caps for the RS Quest. Used to seal off the holes in the deck when the RS Quest does not have a mainsheet hoop installed. Attach using 2x screws, whose part number is FIX-B5-C12.

Mainsheet Hoop Kit for the RS Quest. Mainsheet Hoops are no longer used on new RS Quests, they have been replaced by a traveler system.

Selden Sliding Eye Heavy Duty Eyestraps. Two of these eyestraps are used on the RS Quest Boom to secure the 40mm boom blocks. Attach to the boom using 2x rivets for each eyestrap. The part numbers for the boom blocks and rivets are 404-101-02R and...