RS Sailing Parts

Gasket between the hull and the rubbing plate on the under (water) side of the RS Quest and RS Zest centerboard case. Use on on each side of the case opening. Secured under the rubbing plate using 6x screws. Made of 2000 sail cloth. Also used on the RS...

Deck plate for the RS Quest and RS Zest Centerboard Case. Use one on each side of the case to secure the centerboard shockcords. Each plate has two holes for adjusting the centerboard friction tubes (which help to hold the centerboard in place). Also...

Carabiner hook for attaching the vang shackle to the lower vang block. Part numbers for the shackle and block are FEV-SP-910 and A4265, respectively.

Shroud Pack for the RS Feva. Pack includes shrouds, attachment shackle, and jib halyard block

Stay Adjuster for the RS Feva. Compact and lightweight, made from high quality stainless steel. Adjustment range: 60mm. Increments: 9mm. Internal width: 8mm. Pin diameter: 5mm.

38mm Eyestrap used for the RS Feva Jib Sheet. Made by Allen Brothers. Used with A676 cam cleat.

28mm Ball Bearing Cam Cleat. Used for the RS Feva Spinnaker Halyard. Made by Allen Brothers. Works for 2-6mm line diameters. Maximum working load 220 lbs.

RS Aero branded plastic water bottle. 500ml Sports Bottle - Black with white cap.

Mounting Base for the RS Aero Vang. Use two screws, part number FIX-S10-P15, to set into the round aperture just forward of the daggerboard case. The vang swivel, part number AER-HF-402, mounts on top of this base.

This Jibe Control Stabilizer, or JC Strap, is used to help ease and keep your RS Aero boom out in light air. Class legal for the RS Aero and supplied by RS Sailing.

Hiking Strap for the RS Aero.

The lower, non-locking gudgeon for the RS Aero and other RS Sailboats. Attaches using two screws whose part number is: FIX-S14-P01.

Carbon grab rail insert for the RS Aero and the new style recessed shorter RS200 grab rail.

The grab rail used on the RS Aero and the new style RS 200. This grab rail measures approximately 63cm.

Replacement Gooseneck Spigot for the RS Aero. Connects the boom end plug to the Gooseneck Assembly.

Only the pigment is supplied. Clear gelcoat and catalyst will need to be purchased separately. Due to some tricky and expensive hazards goods rules around shipping, in most case these items will need to be sourced locally. 20g of RS Pigment mixed into...