RS Aero Parts

Centerboard case gasket fluff for the RS Aero. Glued into the centerboard case to give the daggerboard a good tight fit, but it is also low friction so the board can still be easily pulled in and out.The item width is 13mm. Sold per meter. Also used on...

Selden Block Tie Deck Organiser for the RS Aero. Used on the Port side of the Mast Step to mount blocks for the outhaul and to secure the daggerboard bungee line. Used on the Starboard side of the Mast Step to mount blocks for the downhaul and vang.

The standard batten tip/batten cap used for the battens in the RS Aero & RS Neo mainsails, plus the key used to tension the battens. Adjust batten tension by turning the hex screw in the batten tip.

Batten set for the RS Aero 7 Sail.

Batten set for the RS Aero 5 Sail.

Dynamic Type 3 dolly for the RS Aero sailboat. Proudly made in the USA by Dynamic Dollies and custom sized for the RS Aero, offering a great fit ease of maneuvering. Shipped in an easy to assemble kit. Dolly style allows bow of boats with a curled...

Lower Mast Section for the new RS Aero 6 square meter sail. RS Sailing Part # AER-SP-006 Oversize Shipping Information This item is considered oversize due to length and/or weight and not eligible for standard shipping. Oversize ground shipping...

The ultimate deck cover for the RS Aero. The Colie Sails deluxe RS Aero Deck Cover is designed for highway travel, off season storage, and 'deck up' style dinghy lot use. A 15 inch wide reinforcement panel runs the length of the cover allowing the spars...

The ultimate hull cover for the RS Aero. The Colie Sails deluxe RS Aero Hull Cover is designed for long life and ultimate ease of use. It is hassle free with no adjustments needed! The 7 installed webbing ties allow the cover to be pulled drum tight...

The ultimate spar bag for RS Aero owners! Designed and produced by the cover experts at Colie Sails, this RS Aero Spar Bag is a full length bag designed to carry your top section, bottom section, and boom. Made from a high quality Top Gun fabric in black...

The RS Aero Rudder Sleeve from Colie Sails is a padded and lined sleeve for the rudder. Similar to traditional Sunfish and Optimist blade bags, the tiller/extension stick out from one end of the bag but the heavy duty padding keeps your blade in top...

The RS Aero Daggerboard Bag from Colie has a padded and lined compartment for the daggerboard. The large mesh pocket is perfect for holding additional parts and gear. Treat your blades right! Like all Colie covers, all materials have been carefully...

Top Plug for the RS Aero Top Section. Also used on the RS Neo.

Plastic eyestrap used to secure both ends of the RS Aero traveler line. Attached to deck using two screws, whose part number is FIX-S10-P15, each. Sold individually. For a complete traveller system, combine with a Harken 40mm Carbo Traveler Block, part...

Upgraded tiller extension for hte RS Aero. Includes a 1.05m tiller extension (3'5"), made with Pro-Ex CPX Carbon Fiber. Supplied with the standard Selden Universal Joint (CA0015).

Carbon Tiller for the RS Aero. Comes with all fittings, decals, and a spare universal joint, whose part number is CA0015.