Upgrades & Accessories

The Laser Bow Rail Guard is a simple accessory to keep this vulnerable part of the boat protected from common scratches and dings. It is molded with a high-grade rubber compound so you can be sure it is tough and long lasting. This bow bumper can be...

This traveler for Laser and ILCA sailboats is made of extremely strong, zero stretch Vectran for the tightest leech tension possible. The line is brummel spliced at the load bearing point to eliminate bulk underneath the tiller and keeping it class legal...

The Holt vang quick pin allows for the detachment of the vang body from the mast to be quick and easy. The push lock ensures that the pin stays put on even the roughest days. This pin is made from grade 316 stainless steel for maximum corrosion...

These Laser / ILCA bailer spring plates are manufactured using the highest quality spring stainless steel, designed to both retract using spring tension, and at the same time providing a surface for the activator to push against to close the chute. A one...

The Frederiksen ratchet block is legendary. It is light and very strong for optimal performance. The ratchet has a small distance between each click to enhance control of sheets. This is the ideal Laser mainsheet block. From Ronstan: The patented...

This 1/4 inch quick pin allows for the detachment of the ILCA vang body from the mast to be quick and easy. Works on both Harken and Ronstan ILCA vang lower units. The push lock ensures that the pin stays put on even the roughest days. This pin is...

This fast pin allows for quick detachment of 3/16" fittings, even under pressure. This pin is commonly used on ILCA vang lower base units (Harken and Ronstan) to attach the cunningham line, replacing the standard clevis pin and rig for quick rigging...

Carbo Ratchets allow sailors to hand-hold loaded lines and offer balance between holding power and controlled easing. On/off switch operates from both sides. Standard grip: medium/light air; 10:1 holding power. Sheave: 57 mm / 2 1/4...

Autobailer springs for ILCA / Laser autobailer assemblies. Replace the old o-rings with more reliable and longer lasting purpose-built springs. Stainless Steel Port and Starboard Class legal Easy to install Made by C-Vane

Quickly and securely attach your outhaul to the clew of the sail. This assembly includes a 16mm Harken ball bearing block and captive-locking shackle ensure smooth action and no unwanted releases! Lowers friction Speeds up the rigging...

The Laser / ILCA Mast Wear Strips are made of thin strips of teflon. They are used to reduce the friction between the Laser / ILCA mast and the step. Mount one at the bottom end of your mast and one just below the deck line. 1 mm teflon Adhesive-backed...

Drop this small teflon disc into the mast hole to help absorb any grit. Take it out regularly to clean off the grit. Helps to prevent wear to the mast step, a critical area on the Laser. Teflon disc for Laser mast step. Prevents premature wear of...

The Allen 20mm Micro Hook Block is deal for dinghy control systems where a quick release is necessary. Great for ILCA / Laser outhaul clew, Tasar halyards, and other small boat halyards that use a fine tune adjuster. Ball Bearings Micro single block...

Perfect for spinnaker sheet turning blocks. This Ronstan block is free wheeling at low wind velocity. As the wind velocity increases the pressure on the sheave automatically engages the ratchet. The sheet rope is never trapped in the sheave and can slide...

The C-Vane Pro bow mounted Laser wind indicator was designed by top Laser coach Ryan Minth. Building on the success of the legendary mast mounted wind indicator, C-Vane introduced this wind indicator as an alternative option for Laser sailors. The vane...

The ILCA / Laser Harken Vang Assembly is a very popular ILCA dinghy upgrade. It features a 15:1 purchase, making fine-tune adjustments much easier and smoother. Kit includes base unit, top block, double block w/ becket, dyneema primary line, purple...