Upgrades & Accessories

The new Harken Power3 ratchet blocks provide sailors that race small one-designs with three holding-power options to handle a variety of wind and sea conditions. More choices allow sailors to fine-tune their set-ups in tandem with the purchase that...

A low-friction Harken 29mm Carbo AirBlocks from Harken. A lightweight, strong, reliable and affordable block. This variation comes with a removable bolt through the middle so it can be undone and connected to various locations on your boat...

The ILCA Daggerboard Friction Pad MK2 is screwed to the back of your Daggerboard casing and allows for perfect grip and slip ratio when raising the board. The New and Improved design lets you replace the Rubber Pad housed inside the Plastic Casing...

Set of high grade foam rig supports for the ILCA / Laser sailboat. Also known as ILCA® Lazy Bones and Laser® spar carriers. Suitable for one boom, two upper masts and two bottom masts which can be stored quick and easy without damaging the deck.

Nylon wear protection pads for the Laser / ILCA dinghy. Designed to stop the mainsheet blocks from damaging the deck of the boat. The wear protectors clip around the traveler fairlead and are held in place by friction and the traveler rope. There is no...

This Laser / ILCA class legal set up is the best way to control your daggerboard. Easy on/off attachment to the blade with an ultra-lightweight snap shackle. Eliminates daggerboard creep with sailing upwind by applying maximum pressure vertically rather...

Stainless steel bailer springs for the Laser® and ILCA® autobailer. A durable replacement for the rubber o-rings. Improved design for smooth opening and closure of the bailer chute.

A handy hiking strap adjuster kit from Rooster for Laser sailboats. The CL 828-68AN comes complete with a two meter length of 4mm EasySplice - this low friction line is ideal in this application. Color of 4mm EasySplice supplied may vary.

The C-Vane Pro bow mounted Laser wind indicator was designed by top Laser coach Ryan Minth. Building on the success of the legendary mast mounted wind indicator, C-Vane introduced this wind indicator as an alternative option for Laser sailors. The vane...

The Allen 20mm Micro Hook Block is deal for dinghy control systems where a quick release is necessary. Great for ILCA / Laser outhaul clew, Tasar halyards, and other small boat halyards that use a fine tune adjuster. Ball Bearings Micro single block...

Drop this small teflon disc into the mast hole to help absorb any grit. Take it out regularly to clean off the grit. Helps to prevent wear to the mast step, a critical area on the Laser. Teflon disc for Laser mast step. Prevents premature wear of...

The Laser / ILCA Mast Wear Strips are made of thin strips of teflon. They are used to reduce the friction between the Laser / ILCA mast and the step. Mount one at the bottom end of your mast and one just below the deck line. 1 mm...

Quickly and securely attach your outhaul to the clew of the sail. 16mm Harken ball bearing block and captive-locking shackle ensure smooth action and no unwanted releases! Lowers friction Speeds up the rigging process Securely fastens to sail

This Rooster quick release pin is for your ILCA/Laser Harken vang/kicker XD system. Easy and quick, releasing - Simply push the button, the pin releases and pull it out. Attach to your Harken vang/kicker XD system to the bottom mast section. A small hole...

Drop nose pins have been around for a while, but never ones that are designed specifically for the diameters and sizes of the ILCA / Laser Harken vang unit. This pin enables you to quickly take off your Cunningham Line, which allows you to de-rig and...

Cunningham and Outhaul Upgrade kit for Laser sailboats. Includes a 6:1 Outhaul and 10:1 Cunningham, all led directly to deck blocks & cleats. Additional purchase creates a mechanical advantage for much smoother operation with less effort. Mounts to...