ISCA / Sunfish Parts

Replacement lower mast cap for the ISCA sailboat. This is the plastic fitting mounted to the bottom of the ISCA mast to help prevent wear in the mast step. This is a plastic fitting and standard on all new Zim Sailing ISCA masts. Lower / Bottom Mast...

The Sunfish Bow Bumper is a simple accessory to keep this vulnerable part of the boat protected from common scratches and dings. It is molded with a high-grade rubber compound so you can be sure it is tough and long lasting. It is a two-piece set,...

This is the bronze Sunfish snap trigger. Tie the end of the mainsheet to this and then snap it onto the traveler. Bronze fitting. Use at end of Sunfish mainsheet for convenient attachment to traveler bridle.

The horn cleat is perfect for tying off halyards securely. Used on a variety of small sailboats, including the Sunfish for securing the main halyard. 3-3/4 inch length. Black anodized aluminum. Commonly found on Sunfish deck for main halyard cleating.

1/4 turn key style drain plug by RWO.  If your existing drain plug housing does not have threads, this is the drain plug you want to buy. If your housing has threads, please take a look at our other drain plug offerings. 1/4 turn design - not a...

Metal hiking strap plate for 420, FJ and Sunfish. Allows the secure attachment of the hiking straps to the boat. Stainless Steel Zim Part # 20015 / Laser Performance Part # 91131 Compatible with both Zim and Laser Performance boats

The regular eyestrap provides an attachment point for a variety of applications such as the Laser hiking strap and mainsheet block. It's also used for the cunningham on V15s, 420s and FJs and other boats. Stainless Steel Flared eye minimizes chafing...

Fairleads are a simple and economical means of containing, deflecting or correcting the lead angle of control lines. Stainless steel liners provide greater abrasion resistance. Commonly used for ISCA / Sunfish sailboat halyard. Impact resistant, U.V...

Replacement boom block with swivel for ISCA / Sunfish sailboat booms. This is the standard Race Lite version. ISCA Boom Block w/ Swivel Zim Sailing Part # 48160   This is an official International Sunfish Class Association™ (ISCA®)...

Replacement upper or top mast cap for the ISCA / Sunfish sailboat. This plastic fitting includes a hole for the halyard to pass through. Cap is typically mounted to the mast with a rivet or pin.  Upper / Top Mast Cap Plastic Fitting Zim Sailing...

Replacement ISCA sailboat boom end cap with single eye. This cap is mounted to the aft end of the upper boom. Plastic Fitting Zim Sailing Part # 48153 This is an official International Sunfish Class Association™ (ISCA®) class approved...

Complete beach launching dolly for the Sunfish sailboat. Dynamic Dollies and Racks brings the latest in design and materials to popular small boat dollies. If you have owned a Seitech Dolly in the past, these dollies are 100% interchangeable but have...

Replacement ISCA / Sunfish sailboat boom end cap without eye. This cap is mounted to the forward end of the boom. Plastic Fitting Zim Sailing Part # 48155 This is an official International Sunfish Class Association™ (ISCA®) class...

The mainsheet spring keeps the mainsheet block upright, making it easier to sheet and preventing the line from kinking. Use on a variety of small sailboats. Stainless Steel 2 inch Tall

Replacement rudder tension springs for the ISCA / Sunfish sailboat. These springs help hold the rudder down while under sail while allowing you to quickly pop the rudder up when approaching shore. Use 2 per rudder head. Tension Springs Sold as a 2...

The Sunfish Bow Bumper is a simple accessory to keep this vulnerable part of the boat protected from common scratches and dings. It is molded with a high-grade rubber compound so you can be sure it is tough and long lasting. It is a two-piece set,...