Hobie Wave

Batten cap for mainsail luff tip. Release the batten tension whenever you store your sails. This will prolong the life of your sails. Luff caps and adjustable leach caps are made of high strength, ultra-violet tolerant Delrin. No knots to tie or untie...

Pin for locking Hobie Cat EZ Loc rudder system in up position during storage. RESOURCES & SUPPORT Hobie Cat Parts Locators Hobie Cat Rigging Guides Shop All Hobie Cat Parts

Stainless steel shroud anchor plate for Hobie Wave shroud assembly. RESOURCES & SUPPORT Hobie Cat Parts Locators Hobie Cat Rigging Guides Shop All Hobie Cat Parts

Hobie Wave hull seal cap for use under seat pads on hulls. RESOURCES & SUPPORT Hobie Cat Parts Locators Hobie Cat Rigging Guides Shop All Hobie Cat Parts

SCREW 1/4-20 X 5/8 PHMS-P SS from Hobie Cat. RESOURCES & SUPPORT Hobie Cat Parts Locators Hobie Cat Rigging Guides Shop All Hobie Cat Parts

1/4-20 HX Nylock nut from Hobie Cat. RESOURCES & SUPPORT Hobie Cat Parts Locators Hobie Cat Rigging Guides Shop All Hobie Cat Parts

Batten that is 43 3/4", not tapered. Availability of the correct batten has often been a problem. The various models of Hobie Cats all use different batten and taper lengths. In earlier years, each model Hobie used a different color batten. The battens...

Hobie EZ Loc style rudder housing for all EZ Loc rudder systems. Made by Hobie Cat. RESOURCES & SUPPORT Hobie Cat Parts Locators Hobie Cat Rigging Guides Shop All Hobie Cat Parts

3/16 inch diameter by 1/4 inch length pop rivet from Hobie Cat. 3/16 inch diameter. 1/4 inch length.   RESOURCES & SUPPORT Hobie Cat Parts Locators Hobie Cat Rigging Guides Shop All Hobie Cat Parts

1/4 inch diameter clevis pin with a 1/2 inch grip length (distance between end of pin and hole for ring ding) from Hobie Cat. Made from stainless steel and sold individually. Pin Diameter (A) is 1/4 in (6.5 mm) Pin Grip Length (B) is 1/2 in (12.5...

5/16 x 9/16 stainless steel flat washer.   RESOURCES & SUPPORT Hobie Cat Parts Locators Hobie Cat Rigging Guides Shop All Hobie Cat Parts

Lower pintle assembly for Hobie Wave sailboat. Original Equipment on all Hobie Wave sailboats. Lower pintle should be mounted with four (4) screws. Use Part # 8030171 for boats 2008 and older, or Part # 8030331 for 2009 and newer. Hobie Cat Part #...

Hobie has taken the tiller connection system for the Hobie 20 and adapted it to other Hobies. Now you can have the no slop, easy adjustment, 10 second assembly/disassembly convenience of the latest in tiller crossbar connection systems. There is no...

Replacement cam cleat plate for Hobie Wave. RESOURCES & SUPPORT Hobie Cat Parts Locators Hobie Cat Rigging Guides Shop All Hobie Cat Parts

Stainless steel S hook for the Hobie Wave mainsheet. Makes it easy to attach mainsheet to sail and standard on all new boats. RESOURCES & SUPPORT Hobie Cat Parts Locators Hobie Cat Rigging Guides Shop All Hobie Cat Parts

Replacement foam seat pad for Hobie Wave hulls. Each boat used four total seat pads. RESOURCES & SUPPORT Hobie Cat Parts Locators Hobie Cat Rigging Guides Shop All Hobie Cat Parts