Cleats

Harken cam cleats utilize a system of multiple rows of ballbearings allowing the line to be cleated by snapping down rather than drawing through. The cams are design to provide maximum holding power without destroying the line. This includes smooth...

Plastic wedge for standard Harken clam cleats. Official Harken part.

Standard horn cleat from Ronstan. 8 inch overall length designed for a max rope diameter of 3/8 inches. Made from a heavy duty UV stabalized nylon for long life and durability.

Standard horn cleat from Ronstan. 6-1/2 inch overall length designed for a max rope diameter of 5/16 inches. Made from a heavy duty UV stabalized nylon for long life and durability.

This Ronstan cam cleat fairlead is easily fitted to existing T-Cleat and C-Cleat cam cleats. Allows precise cleating and release from any lead angle with lower entry efforts for off-centre cleating. Made from a tough, abrasion resistant composite...

This cam cleat saddle is used to keep the uncleated line within close proximity to the cleat, facilitating recleating. Made from grade 316 stainless steel and suitable for medium Ronstan T-Cleat and C-Cleat cam cleats. Grade 316 stainless steel Weight -...

This cam cleat saddle is used to keep the uncleated line within close proximity to the cleat, facilitating recleating. Made from grade 316 stainless steel and suitable for small Ronstan T-Cleat and C-Cleat cam cleats. Grade 316 stainless steel Weight -...

The Ronstan T-Cleat medium cam cleat is the product of intensive development efforts, producing a range of cleats that provide unbeatable holding power, yet are designed for easy cleating and releasing of control lines in every application and load...

Intensive development efforts have produced this range of cleats that provide unbeatable holding power, yet are designed for easy cleating and releasing of control lines in every application and load condition. Through the use of advanced composites,...

Intensive development efforts have produced this range of cleats that provide unbeatable holding power, yet are designed for easy cleating and releasing of control lines in every application and load condition. Through the use of advanced composites,...

Wedge kits and risers are available to improve the angle of your cams. Underdeck shims are included with angled risers and wedges for easy mounting. Height (mm)16 mm Height (in) 5/8 in Length (mm)48 mm Length (in)1 7/8 in Width (mm)24 mm Width (in)...

Wedge kits and risers are available to improve the angle of your cams. Underdeck shims are included with angled risers and wedges for easy mounting. This micro riser has a 15 degree angle. Height (mm)19 mm Height (in) 3/4 in Length (mm)48 mm Length...

Harken ball bearing cam cleats hold lines securely and release instantly for easy, precise trimming. Aluminum Cam-Matics are hardcoat-anodized for high-load, high-wear, continuous adjustment applications.. Height (mm)22 mm Height (in) 7/8 in Length...

Ball bearing swivel bases feature dual rows of Delrin ball bearings that swivel freely even under high loads. Bases include stand-up springs and a U-adaptor to accept a variety of appropriate blocks. The low profile 205 is used when installation is at...

Cleat support wedge with fairlead, commonly found Adventure Island and Tandem Island kayaks on the forward cross bar. HCC Part # 79531101 Cleat support wedge with fairlead   RESOURCES & SUPPORT Hobie Cat Parts Locators Hobie Cat Rigging...

Wedge kits and risers are available to improve the angle of your cams. Under deck shims are included with angled risers and wedges for easy mounting. Height (mm)28 mm Height (in)1 in Length (mm)65 mm Length (in)2 9/16 in Width (mm)32 mm Width (in)1 1/4...