Hardware

1/4 inch x 1 inch stainless steel clevis pin with zinc finish from Ronstan. Features a 1 inch grip length (distance between cap and pin hole) and 1-3/16 total pin length. Pin Diameter is 1/4 inches Pin Grip Length is 1 inch Sold individually Made by...

Ideal if split ring security is necessary A: 5.9 mm B: 12.2 mm C: 11.3 mm P.L. B.L.: 600 kg U.D.L. B.L.: 900 kg Weight: 10g

This safety shackle is made from stainless steel and can be easily released with one hand. Stainless steel construction Easy one handed use

Harken cam cleats utilize a system of multiple rows of ballbearings allowing the line to be cleated by snapping down rather than drawing through. The cams are design to provide maximum holding power without destroying the line. This includes smooth...

Wedge kits and risers are available to improve the angle of your cams. Under deck shims are included with angled risers and wedges for easy mounting. Height (mm)25 mm Height (in)1 in Length (mm)65 mm Length (in)2 9/16 in Width (mm)32 mm Width (in)1 1/4...

The standard dimensional format shackle provides a high load capacity and compact size. A: 4.7 mm B: 18.0 mm C: 12.0 mm P.L. B.L.: 800 kg U.D.L. B.L.: 1400 kg Weight: 10g

Smooth, uniform rotation in all directions and a quick, firm response to steering movements. The RF3133 universal joint with snap-on cover is designed to allow quick fitting and removal of the tiller extension from the fixed base. A direct...

Plastic wedge for standard Harken clam cleats. Official Harken part.

The Holt vang quick pin allows for the detachment of the vang body from the mast to be quick and easy. The push lock ensures that the pin stays put on even the roughest days. This pin is made from grade 316 stainless steel for maximum corrosion...

Heavy duty stainless steel bow shackle from Ronstan with a slotted pin. Features a 1/8 inch diameter pin (A), 5/32 inch working internal width (B), and a 3/4 inch working length (C). The slotted pin can be removed with a flat head screw driver. A: 3.0...

3/16 inch x 1 inch stainless steel clevis pin with zinc finish from Ronstan. Features a 1 inch grip length (distance between cap and pin hole) and 1-1/8 total pin length. Pin Diameter is 3/16 inches Pin Grip Length is 1 inch Sold individually Made by...

The twist shackle allows for blocks and other equipment to be properly aligned when attached. 90 degree twist allows for proper alignment Used primarily on vang assemblies

Deluxe tiller extension is built from black anodized aluminum. The extension comes with a comfortable foam grip and a releasable universal with a fiber core. Black anodized aluminum construction Comfortable foam grip Releasable universal joint with...

Swivel cleat bases permit easy cleating and releasing from any angle. Sheave can be relocated up or down to allow the control line to feed from below. Series 20 ball bearing sheave Small "T-Cleat" "Fast Track" fairlead

Ball bearing swivel bases feature dual rows of Delrin ball bearings that swivel freely even under high loads. Bases include stand-up springs and a U-adaptor to accept a variety of appropriate blocks. The low profile 205 is used when installation is at...

The Harken 240 Swivel Cam Cleat is a simple swivel base for main and jib sheets on very small boats or for control lines on boats of all sizes. This model works with line up to 12 mm and great for large diameter sheets. Height: 49 mm / 1-15/16 inch...