The long C420 Shroud Adjuster Cover is designed for use with Zim Sailing's C420 shroud link plates. Sold individually. 

Protect your shroud adjuster and prevent cuts and scrapes. These covers prevent jib sheets from catching on pins and makes changing settings on the water easier. Can also be used on your jib halyard shackle to keep the spinnaker from snagging on sharp...

Upgrade your C420 with this lightweight main halyard constructed with 3 mm dyneema with rigging ball spliced for head of sail. Reduces windage and weight aloft. 

Standard aluminum C420 and FJ Tiller With 33" Extension. Zim Part # 20344 LP Part # 85298

Complete rigged rudder including rudder head, blade, and downhaul. Zim V2 rudders are only compatible with Zim C420s. To fit on a PS2000, Vanguard, or LP boat you must order the V1 rudder. Zim 420 rudder blades have a seamless edge that makes for a...

Durable Pram sail that has captive webbing at the top of the mast and clew.  There is no need for an outhaul. The luff is approximately 6” shorter than a standard Optimist sail to help lessen head injuries and allow for 2 people in the boat...

This is a 5mm x 25mm ring made from high quality stainless steel. It is commonly used as the Main Halyard ring on the Club 420 and FJ sailboats, as well as the bridle ring on Optimist sailboats.  Similar to EX1362. 

This magnetic boat set is ideal for accurately displaying dinghy races, enforcing and teaching the racing rules, as well as for protests. For sailing clubs, committees, sailors and coaches to use on a whiteboard. This pack comes in a handy zip lock,...

Upper pintle for Zim Sailing 420s and FJs with over-the-transom-rudders.  Stainless Steel 2 Hole Mounting Hole Spacing: 2 inch Hole Size: 1/4 inch Zim Part # 20032

Lower pintle for Zim Sailing 420s and FJs with over-the-transom-rudders.  Stainless Steel 2 Hole Mounting Hole Spacing: 2 inch Hole Size: 1/4 inch Zim Part # 20031

Many RS Aero sailors have converted their Outhaul and Cunningham controls to the 'over deck' style which allows easier release of the controls. This strop is used to cow hitch a pair of Ronstan Shock Blocks through the existing gunwhale thru deck holes...

J/80 sailboat traveler line, made from 6mm SSR to a finished length of ~18 feet with end whips. SSR a single braid blend of Spectra and Cordura makes this line both durable and soft in the hand. Very similar to Maffiloli switfcord and ideal for sail...

Replacement tack line for the J/80 sailboat from the West Coast Sailing Rig Shop. The tack line is a high load application, so we build ours from 8mm Marlow D2 Race. This is a high-strength, lightweight all-round performance line with Dyneema core...

Complete 'Y Style' spinnaker sheets for the J/80 sailboats. Designed to be an appropriate length for 'inside gybing' (preferred), our J/80 spin sheets start with two lengths of Marlow D2 Race, a premium Dyneema core line with hard wearing 24 plait...

Upgrade your J/80 sailboat with a new Spinnaker Halyard from the West Coast Sailing Rig Shop.  We build these from 6mm Marlow Excel Racing line, which features a color matched Dyneema SK-78 core for low stretch with a 16 plait cover for...

Replacement spinnaker pole launching line for the J/80 sailboat. Made from a durable 8mm New England Ropes Sta-Set line with end whips, finished to a working length of 20 feet. Spinnaker Pole Launch Line 8mm New England Ropes Sta-Set End Whips Working...