Cable gland for Hobie Evolve Torqueedo M12 motor.

Pulls over boom and sail like a sock. Open end closes with a drawstring and nylon clasp. Material and color may vary. For the Hobie Wave.  RESOURCES & SUPPORT Hobie Cat Parts Locators Hobie Cat Rigging Guides Shop All Hobie Cat Parts

Hog rings can be crimped to secure two pieces of line or a single line in a loop. Commonly use for making shockcord loops on small sailboats. 3/8 inch stainless steel hog ring. Works for up to 3/16 inch or 5 mm diameter line.

Track used for the jib sheet blocks on the Hobie 16. Works on port or starboard side of front crossbar and installed with rivets. 6 hole track Requires (6) 3/16 X 3/8" CSK Rivets (Part Number 8010201) Also used as a Hobie 18 jib track (port or...

RESOURCES & SUPPORT Hobie Cat Parts Locators Hobie Cat Rigging Guides Shop All Hobie Cat Parts

Double 1 inch ball socket assembly for Hobie RAM mounting system.   RESOURCES & SUPPORT Hobie Cat Parts Locators Hobie Cat Rigging Guides Shop All Hobie Cat Parts

This screw in cleat provides a handy desk fastener location on your Hobie kayak.

Large size Clevis Ring from Hobie Cat. Works with most clevis pins. Large size stainless steel clevis ring for most clevis pins. Hobie Cat # 20860000.   RESOURCES & SUPPORT Hobie Cat Parts Locators Hobie Cat Rigging Guides Shop All Hobie Cat...

Replacement jib hank with screw from Hobie Cat. RESOURCES & SUPPORT Hobie Cat Parts Locators Hobie Cat Rigging Guides Shop All Hobie Cat Parts

Strap assembly replacement for Hobie Pro Angler kayak seat.

Hobie Cat batten that is 100 9/16" long and non-tapered. Availability of the correct batten has often been a problem. The various models of Hobie Cats all use different batten and taper lengths. In earlier years, each model Hobie used a different color...

Lower forestay wire assembly for Hobie Getaway. Made by Hobie Cat and works with all years of Getaway sailboats. RESOURCES & SUPPORT Hobie Cat Parts Locators Hobie Cat Rigging Guides Shop All Hobie Cat Parts

Replacement wire shroud for Hobie Getaway. Works on either port or starboard side. RESOURCES & SUPPORT Hobie Cat Parts Locators Hobie Cat Rigging Guides Shop All Hobie Cat Parts

Replacement lower mast cap for the ISCA sailboat. This is the plastic fitting mounted to the bottom of the ISCA mast to help prevent wear in the mast step. This is a plastic fitting and standard on all new Zim Sailing ISCA masts. Lower / Bottom Mast...

The vang wedge allows for the appropriate cleating angle for the split lead Tasar vang Newly redesigned in 2009 Made from solid delrin Class legal

Replacement 3/16 inch batten cap for Hobie Adventure Island kayak sail. Fits 3/16 inch diameter batten rod. 3/16 inch batten cap for 3/16 diameter batten rod found on Adventure Island. Also used for Hobie Bravo Batten #1, Batten #2, and Batten #3, which...