Protect your shroud adjuster and prevent cuts and scrapes. These covers prevent jib sheets from catching on pins and makes changing settings on the water easier. Can also be used on your jib halyard shackle to keep the spinnaker from snagging on sharp...

Upgrade your C420 with this lightweight main halyard constructed with 3 mm dyneema with rigging ball spliced for head of sail. Reduces windage and weight aloft. 

Standard aluminum C420 and FJ Tiller With 33" Extension. Zim Part # 20344 LP Part # 85298

Complete rigged rudder including rudder head, blade, and downhaul. Zim V2 rudders are only compatible with Zim C420s. To fit on a PS2000, Vanguard, or LP boat you must order the V1 rudder. Zim 420 rudder blades have a seamless edge that makes for a...

Durable Pram sail that has captive webbing at the top of the mast and clew.  There is no need for an outhaul. The luff is approximately 6” shorter than a standard Optimist sail to help lessen head injuries and allow for 2 people in the boat...

The SL training sails can be used on the Optimist or Pram. The luff has been shortened to raise the boom height. Battens have been eliminated for easy storage. This is meant to lessen head injuries and allow for 2 sailors in the boat. Additionally,...

The SL training sails can be used on the Optimist or Pram. The luff has been shortened to raise the boom height. Battens have been eliminated for easy storage. This is meant to lessen head injuries and allow for 2 sailors in the boat. Also available in...

This is a 5mm x 25mm ring made from high quality stainless steel. It is commonly used as the Main Halyard ring on the Club 420 and FJ sailboats, as well as the bridle ring on Optimist sailboats.  Similar to EX1362. 

It has never been so easy to measure and adjust your Optimist mast rake before your training or regatta. Place the special hook in the top-aft of the mast and measure the distance to the edge of the deck. The blade shows imperial units (inches) and...

This magnetic boat set is ideal for accurately displaying dinghy races, enforcing and teaching the racing rules, as well as for protests. For sailing clubs, committees, sailors and coaches to use on a whiteboard. This pack comes in a handy zip lock,...

This large traveler block is the upper part of the traveler assembly. The mainsheet passes through this block while it is hooked to the lower (small) traveler block. Mounts to Small Traveler Block Brummel hook included Sheave Diameter:...

This small traveler block is the lower part of the Laser traveler assembly. The traveler line passes through the block while the other side clips to the larger traveler block above. Mounts to Large Traveler Block Brummel hook included Sheave...

Upper pintle for Zim Sailing 420s and FJs with over-the-transom-rudders.  Stainless Steel 2 Hole Mounting Hole Spacing: 2 inch Hole Size: 1/4 inch Zim Part # 20032

Lower pintle for Zim Sailing 420s and FJs with over-the-transom-rudders.  Stainless Steel 2 Hole Mounting Hole Spacing: 2 inch Hole Size: 1/4 inch Zim Part # 20031

Many RS Aero sailors have converted their Outhaul and Cunningham controls to the 'over deck' style which allows easier release of the controls. This strop is used to cow hitch a pair of Ronstan Shock Blocks through the existing gunwhale thru deck holes...

J/80 sailboat traveler line, made from 6mm SSR to a finished length of ~18 feet with end whips. SSR a single braid blend of Spectra and Cordura makes this line both durable and soft in the hand. Very similar to Maffiloli switfcord and ideal for sail...