Stainless steel eyestrap for mounting boom blocks on the ILCA dinghy or Laser sailboat boom. Attaches with two rivets sold separately. Stainless steel Installs with two 3x16 x 1/4 inch rivets Use to attach the boom block (mid boom) or boom block with...

The Boom Vang Plate is attached to the forward section of the boom and has a slot for the vang key to slide into, forming the upper connection of your boom vang assembly. Stainless steel Attaches to lower side of forward end of boom Works on any ILCA...

The Boom Gooseneck Plug mounts to the forward end of the boom and has a hole to accept the stainless gooseneck fitting. Attaches with rivets. Plastic fitting Fits any ILCA dinghy or Laser sailboat boom Install with a 3/16 x 1/4 rivet (not included)

Base plug for the bottom of the ILCA 7 and ILCA 4 lower mast sections. If you have an ILCA 6 lower mast, use the ILCA 6 Lower Section Base Plug which has a slightly different inner diameter. Plastic base plug fitting Designed to fit base of ILCA 7 and...

Stainless steel gooseneck assembly for the ILCA lower mast. This fitting is mounted on the lower mast section and is designed to work with the Gooseneck Plug, which is mounted on the forward end of the boom, to securely connect the boom to the mast...

Base plug fitting for the ILCA upper mast section. Use in conjunction with the Top Section Connector Sleeve to ensure a great fit between your upper and lower masts. Not compatible with composite uppers without sanding. See details below. Plastic...

The connector sleeve is attached to the lower part of the ILCA top section to form the connection between the top mast and lower mast sections. The lip of the connector sleeve rests on the top of the lower mast section to form the full mast length. ...

End plug fitting for the top of the ILCA top mast section and the aft end of the ILCA boom. Made of a heavy duty plastic for long life. Attach with a single rivet. Plastic end plug Commonly used for top of upper mast section and aft end of...

Base plug for the bottom of the ILCA 6 lower mast section. If you have an ILCA 7 or ILCA 4, use the standard Lower Section Base Plug. Plastic base plug fitting Designed specifically for the profile of the ILCA 6 lower mast section Also fits existing...

This is the classic rudder retaining pin for securing your ILCA tiller to your ILCA rudder. Use in conjunction with a rudder retaining line.

Upgraded 10 mm mega bolt for ILCA rudder head for a secure connection to your rudder blade. Fits any ILCA or Laser rudder head. Stainless steel rudder bolt 10mm diameter Works with any ILCA or Laser rudder head Replacement for LaserPerformance Part...

Standard rudder head for the ILCA dinghy. Includes upper and lower pintles. Purchase rudder blade and rudder bolt separately. Rudder head with pintles for ILCA and Laser sailboats Head only - does not include bolt or blade International Laser Class...

Rudder blade for the ILCA dinghy. This is the latest 'GRP' blade, a durable fiberglass 'resin infused' material that outlasts and outperforms previous style rudders. Approved for all racing. Blade only, does not include rudder head or rudder bolt. GRP...

The plastic Daggerboard Stop Set is mounted on the upper forward corner of the ILCA dinghy daggerboard to prevent the board from sliding through the daggerboard slot. It is a simple two piece snap plastic fitting for easy installation. Three piece...

Daggerboard for the ILCA dinghy. This is the latest 'GRP' blade, a durable fiberglass 'resin infused' material that outlasts and outperforms previous style daggerboards. Approved for all racing. GRP style Daggerboard International Laser Class...

Replacement set of batten tips for standard ILCA batten set (ILCA 4 and ILCA 6 sails). Includes 6 batten tips.