RS Sailing

Righting Line Kit for the RS Aero. Line attaches to the same anchor point as the side deck under gunwale fairleads, this in turn is connected by a pulley to a bungee which runs through the bow under...

Mast Track for the Aero Mainsail. Attaches using glue and one rivet. whose part number is: RSM-MS-301, at the top. Sold in 1 meter lengths of track.

Mast Step for the RS Aero. This is the actual collar that sits into the deck into which the mast is stepped. Screws to the deck using two screws whose part number is: FIX-S10-C34.

This Jibe Control Stabilizer, or JC Strap, is used to help ease and keep your RS Aero boom out in light air. Class legal for the RS Aero and supplied by RS Sailing.

Hiking Strap for the RS Aero.

Main Halyard Upgrade for the RS Aero. Line is pre-spliced for ease of use with the halyard lock and features tapered line. Produced by RS Sailing and class legal for the RS Aero.

The lower, non-locking gudgeon for the RS Aero and other RS Sailboats. Attaches using two screws whose part number is: FIX-S14-P01.

Carbon grab rail insert for the RS Aero and the new style recessed shorter RS200 grab rail.

The grab rail used on the RS Aero and the new style RS 200. This grab rail measures approximately 63cm.

Replacement Gooseneck Spigot for the RS Aero. Connects the boom end plug to the Gooseneck Assembly.

Only the pigment is supplied. Clear gelcoat and catalyst will need to be purchased separately. Due to some tricky and expensive hazards goods rules around shipping, in most case these items will need...

Centerboard case gasket fluff for the RS Aero. Glued into the centerboard case to give the daggerboard a good tight fit, but it is also low friction so the board can still be easily pulled in and out...