Base plug fitting for the ILCA *Composite* upper mast section. Use in conjunction with the Top Section Connector Sleeve to ensure a great fit between your upper and lower masts. This fitting is specific to the composite upper mast sections (not the...

The new Series 30 Curved Vang Key for Laser / ILCA from Ronstan. The vang key attaches to the upper vang block and slides into the boom vang plate that is mounted on the ILCA / Laser boom. It provides a quick but solid connection for easy rigging...

The standard boom block is mounted to the mid point of the ILCA boom. Pass your mainsheet up from your mainsheet block, through the boom block, and then aft to the boom block with becket to complete your rigging. Attaches to the boom with the stainless...

The boom block with becket is attached to the aft end of the ILCA boom. Pass your mainsheet through the block, down to the traveler block, and back up to secure to the becket. This is the latest ball bearing version from Harken as included on all new...

The Boom Vang Plate is attached to the forward section of the boom and has a slot for the vang key to slide into, forming the upper connection of your boom vang assembly. Stainless steel Attaches to lower side of forward end of boom Works on any ILCA...

The Boom Gooseneck Plug mounts to the forward end of the boom and has a hole to accept the stainless gooseneck fitting. Attaches with rivets. Plastic fitting Fits any ILCA dinghy or Laser sailboat boom Install with a 3/16 x 1/4 rivet (not included)

Base plug for the bottom of the ILCA 7 and ILCA 4 lower mast sections. If you have an ILCA 6 lower mast, use the ILCA 6 Lower Section Base Plug which has a slightly different inner diameter. Plastic base plug fitting Designed to fit base of ILCA 7 and...

Base plug fitting for the ILCA upper mast section. Use in conjunction with the Top Section Connector Sleeve to ensure a great fit between your upper and lower masts. Not compatible with composite uppers without sanding. See details below. Plastic...

The connector sleeve is attached to the lower part of the ILCA top section to form the connection between the top mast and lower mast sections. The lip of the connector sleeve rests on the top of the lower mast section to form the full mast length. ...

End plug fitting for the top of the ILCA top mast section and the aft end of the ILCA boom. Made of a heavy duty plastic for long life. Attach with a single rivet. Plastic end plug Commonly used for top of upper mast section and aft end of boom Works on...

Base plug for the bottom of the ILCA 6 lower mast section. If you have an ILCA 7 or ILCA 4, use the standard Lower Section Base Plug. Plastic base plug fitting Designed specifically for the profile of the ILCA 6 lower mast section Also fits existing...

Base plug for the bottom of the ILCA 6 / Laser Radial Composite Lower Mast Section. This plug is specific for the composite lower and not designed for the aluminum lower mast section.  Base Plug ILCA 6 Composite Lower Other Base Plugs: ILCA...

The Laser / ILCA Vang Upper Block is a Harken wire block with becket with attached vang key. It features indented sides to prevent the line from slipping off the sheave. The included vang key is the latest 'updated' style with larger head for...

Keep your mainsheet off the deck with this webbing strap. It is mounted between the two boom blocks and attaches with a rivet. Works on any ILCA dinghy or Laser sailboat boom. Fabric Strap Install with a rivet (not included) Works on both ILCA dinghy...

Keep your Laser / ILCA Harken Vang Base in top condition by replacing your worn out fairlead. Modern control lines with Technora and other high strength fibers can wear the edges of your fairlead, leading to premature wear on your control line. Flipping...

This strong alloy clam ('jam') cleat is perfect for a variety of applications from halyards to travelers to control lines. Integrated fairlead guides line into cleat Mounts easily to flat or curved surfaces Suitable for use with 3mm to 6mm lines...