Hardware

Endstops absorb shock loads. Use the built-in groove to deadend 2:1 control line. Sold in pairs. Fasteners not included.

MKIV furling systems are strong, lightweight and aerodynamic, with the performance and features Harken is known for. Longevity, ease of use, and simplicity of installation are crucial components of the design. ONE DESIGN APPLICATIONS This fitting is...

Small Boat underdeck furling units are ideal for sportboats and daysailers from 4.8 m to 9 m (16 to 30 ft). The drum is located beneath the deck, lowering the tack height for maximized sail area. An optional hoistable ball bearing halyard swivel can be...

This optional hoistable ball bearing halyard swivel can be installed on your headstay so you can raise or lower the sail without removing the headstay. Swivels are independent of the headstay, allowing you to tension the luff separately from the mast...

This optional hoistable ball bearing halyard swivel can be installed on your headstay so you can raise or lower the sail without removing the headstay. Swivels are independent of the headstay, allowing you to tension the luff separately from the mast...

This optional hoistable ball bearing halyard swivel can be installed on your headstay so you can raise or lower the sail without removing the headstay. Swivels are independent of the headstay, allowing you to tension the luff separately from the mast...

Harken Small Boat furling systems allow the trailerable cruising or dinghy sailor to set and furl the jib from the cockpit. The hoistable ball bearing halyard swivel can be installed on your headstay so you can raise or lower the sail without removing...

Harken Small Boat furling systems allow the trailerable cruising or dinghy sailor to set and furl the jib from the cockpit. An optional hoistable ball bearing halyard swivel can be installed on your headstay so you can raise or lower the sail without...

Harken Small Boat furling systems allow the trailerable cruising or dinghy sailor to set and furl the jib from the cockpit. An optional hoistable ball bearing halyard swivel can be installed on your headstay so you can raise or lower the sail without...

This Ronstan cam cleat fairlead is easily fitted to existing T-Cleat and C-Cleat cam cleats. Allows precise cleating and release from any lead angle with lower entry efforts for off-centre cleating. Made from a tough, abrasion resistant composite...

This cam cleat saddle is used to keep the uncleated line within close proximity to the cleat, facilitating recleating. Made from grade 316 stainless steel and suitable for medium Ronstan T-Cleat and C-Cleat cam cleats. Grade 316 stainless steel Weight -...

This cam cleat saddle is used to keep the uncleated line within close proximity to the cleat, facilitating recleating. Made from grade 316 stainless steel and suitable for small Ronstan T-Cleat and C-Cleat cam cleats. Grade 316 stainless steel Weight -...

The Ronstan T-Cleat medium cam cleat is the product of intensive development efforts, producing a range of cleats that provide unbeatable holding power, yet are designed for easy cleating and releasing of control lines in every application and load...

Intensive development efforts have produced this range of cleats that provide unbeatable holding power, yet are designed for easy cleating and releasing of control lines in every application and load condition. Through the use of advanced composites,...

Intensive development efforts have produced this range of cleats that provide unbeatable holding power, yet are designed for easy cleating and releasing of control lines in every application and load condition. Through the use of advanced composites,...

Wedge kits and risers are available to improve the angle of your cams. Underdeck shims are included with angled risers and wedges for easy mounting. Height (mm)16 mm Height (in) 5/8 in Length (mm)48 mm Length (in)1 7/8 in Width (mm)24 mm Width (in)...