Hardware

Cleat support wedge, commonly found Adventure Island and Tandem Island kayaks on the forward cross bar. HCC Part # 79531111   RESOURCES & SUPPORT Hobie Cat Parts Locators Hobie Cat Rigging Guides Shop All Hobie Cat Parts

Wedge kits and risers are available to improve the angle of your cams. Under deck shims are included with angled risers and wedges for easy mounting. Length (mm)48 mm Length (in)1 7/8 in Width (mm)24 mm Width (in) 15/16 in Weight (g)5 g Weight (oz)0.16...

The Harken vang quick pin allows for the detachment of the vang body from the mast to be quick and easy. The push lock ensures that the pin stays put on even the roughest days. This pin is made from grade 316 stainless steel for maximum corrosion...

3/16 inch x 3/4 inch stainless steel clevis pin with zinc finish from Ronstan. Features a 3/4 inch grip length (distance between cap and pin hole) and 7/8 inch total pin length. Pin Diameter is 3/16 inches Pin Grip Length is 3/4 inch Sold individually...

1/4 inch x 1 inch stainless steel clevis pin with zinc finish from Ronstan. Features a 1 inch grip length (distance between cap and pin hole) and 1-3/16 total pin length. Pin Diameter is 1/4 inches Pin Grip Length is 1 inch Sold individually Made by...

This safety shackle is made from stainless steel and can be easily released with one hand. Stainless steel construction Easy one handed use

Harken cam cleats utilize a system of multiple rows of ballbearings allowing the line to be cleated by snapping down rather than drawing through. The cams are design to provide maximum holding power without destroying the line. This includes smooth...

The standard dimensional format shackle provides a high load capacity and compact size. A: 4.7 mm B: 18.0 mm C: 12.0 mm P.L. B.L.: 800 kg U.D.L. B.L.: 1400 kg Weight: 10g

Smooth, uniform rotation in all directions and a quick, firm response to steering movements. The RF3133 universal joint with snap-on cover is designed to allow quick fitting and removal of the tiller extension from the fixed base. A direct...

Plastic wedge for standard Harken clam cleats. Official Harken part.

The Holt vang quick pin allows for the detachment of the vang body from the mast to be quick and easy. The push lock ensures that the pin stays put on even the roughest days. This pin is made from grade 316 stainless steel for maximum corrosion...

Standard 7 hole shroud adjuster used on a variety of Hobie Cat shroud and forestay assemblies to connect wire to deck. RESOURCES & SUPPORT Hobie Cat Parts Locators Hobie Cat Rigging Guides Shop All Hobie Cat Parts

Heavy duty stainless steel bow shackle from Ronstan with a slotted pin. Features a 1/8 inch diameter pin (A), 5/32 inch working internal width (B), and a 3/4 inch working length (C). The slotted pin can be removed with a flat head screw driver. A: 3.0...

3/16 inch x 1 inch stainless steel clevis pin with zinc finish from Ronstan. Features a 1 inch grip length (distance between cap and pin hole) and 1-1/8 total pin length. Pin Diameter is 3/16 inches Pin Grip Length is 1 inch Sold individually Made by...

The twist shackle allows for blocks and other equipment to be properly aligned when attached. 90 degree twist allows for proper alignment Used primarily on vang assemblies

Deluxe tiller extension is built from black anodized aluminum. The extension comes with a comfortable foam grip and a releasable universal with a fiber core. Black anodized aluminum construction Comfortable foam grip Releasable universal joint with...