Hardware

The Ronstan C-Cleat large cam cleat is the product of intensive development efforts, producing a range of cleats that provide unbeatable holding power, yet are designed for easy cleating and releasing of control lines in every application and load...

Swivel cleat bases permit easy cleating and releasing from any angle. Dead eyes contain stainless steel liners for low friction and long life. Cleating plates are heavy gauge alloy for stiffness and minimum distortion under load. Great for sheet leads...

Intensive development efforts have produced this range of cleats that provide unbeatable holding power, yet are designed for easy cleating and releasing of control lines in every application and load condition. Through the use of advanced composites,...

This plastic cleat is suitable for low-load uses. A simple and economical cleat. Total Length: 3 1/4" Hole Center to Hole Center: 2 5/8" Width:  11/16" Fits Ropes 1/8" - 1/4" Durable Nylon construction Mounts easily to flat or rounded surfaces

Intensive development efforts have produced this range of cleats that provide unbeatable holding power, yet are designed for easy cleating and releasing of control lines in every application and load condition. Through the use of advanced composites,...

V-Cleats are a simple solution to cleating lines under moderate loads.Cut away in base of fairlead cleats can be used as a becket for a 2:1 purchase system. great for Control lines on dinghies and catamarans. Lightweight. Low, snag free profile. Base...

This is a standard bow shackle used commonly on the 420, FJ & V15 and as a mast bail on 3:1 purchase 420 vangs. It is an excellent shackle for all-around use with screw pin included. HAR 2110 1/4 inch / 6mm diameter screw pin for easy...

V-Cleats are a simple solution to cleating lines under moderate loads.Cut away in base of fairlead cleats can be used as a becket for a 2:1 purchase system. great for Control lines on dinghies and catamarans. Lightweight. Low, snag free profile. Base...

Use the 237 and 339 where there is little deflection in the line such as when routing a spinnaker pole foreguy aft along the cabin house. Use with Harken 241 cam base. A (mm)32 mm A (in)1 1/4 in B (mm)38 mm B (in)1 1/2 in Fasteners (mm)5 RH...

C420 sailboat aluminum tiller complete with downhaul cleat and 36" extension. Also fits Laser Performance C420 sailboat rudder heads. Aluminum tiller with cleat for downhaul 36" aluminum extension with foam grip and standard rubber universal...

Intensive development efforts have produced this range of cleats that provide unbeatable holding power, yet are designed for easy cleating and releasing of control lines in every application and load condition. Through the use of advanced composites,...

Wide dee shackles have a wider internal width clearance for fitting to wider, irregular shaped or multiple objects. Their point load B.L. is generally lower than that of standard pin length shackles. A: 4.8 mm B: 29.0 mm C: 20.0 mm P.L. B.L.: 700 kg U.D...

Stamped shackles are used on most small boat blocks and are appropriate for low loads. This shackle has a 6 mm / 1/4 inch pin with a ring for easy attachment. For higher loads, select forged and high-resistance shackles instead. Shackle pin: (mm)6...

Heavy duty stainless steel bow shackle from Ronstan with pin. Features a 1/4 inch diameter pin (A), 13/16 inch working width (B), and a 3/4 inch working length (C). A: 6.4 mm / 1/4 inch B: 21.0 mm / 13/16 inch C: 19.0 mm / 3/4 inch Working Load: 1400 kg...

The Harken Swivel Cam Cleat is a simple swivel base for main and jib sheets on small sailboats. Includes a swivel base, bullseye fairlead, and standard Harken cam cleat. The base rotates 360 degrees making it easy to cleat and un-cleat from any angle...

This strong alloy clam ('jam') cleat is perfect for a variety of applications from halyards to travelers to control lines. Integrated fairlead guides line into cleat Mounts easily to flat or curved surfaces Suitable for use with 3mm to 6mm lines...