Hardware

Zim Sailing has developed a new aluminum tiller for Cal Style CFJ sailboats that is now class approved! The plastic wedge makes our CFJ tiller compatible with a wide range of rudder heads for CFJs from different builders and different years. Say goodbye...

Wedge kits and risers are available to improve the angle of your cams. Underdeck shims are included with angled risers and wedges for easy mounting. This micro riser has a 15 degree angle. Height (mm)19 mm Height (in) 3/4 in Length (mm)48 mm Length...

This stainless steel eyestrap provides the attachment point for the boom blocks on the 420, FJ, V15, and Laser. Original Equipment Stainless Steel 40mm Hole Spacing 19mm Eyestrap Height

The fine tune stay adjuster provides for a quick and easy way to adjust stay tensions. It greatly reduces the risk of losing the stay when adjusting rig tension. 316 stainless steel Pin - 3/16 inch Increment Length - 5/32 in. Qty. Adjustment Settings -...

Harken ball bearing cam cleats hold lines securely and release instantly for easy, precise trimming. Aluminum Cam-Matics are hardcoat-anodized for high-load, high-wear, continuous adjustment applications.. Height (mm)22 mm Height (in) 7/8 in Length...

Ball bearing swivel bases feature dual rows of Delrin ball bearings that swivel freely even under high loads. Bases include stand-up springs and a U-adaptor to accept a variety of appropriate blocks. The low profile 205 is used when installation is at...

Cleat support wedge with fairlead, commonly found Adventure Island and Tandem Island kayaks on the forward cross bar. HCC Part # 79531101 Cleat support wedge with fairlead   RESOURCES & SUPPORT Hobie Cat Parts Locators Hobie Cat Rigging...

This shackle is primarily used to attach the jib halyard block to the mast hounds assembly. Includes Clevis Pin and Ring

Wedge kits and risers are available to improve the angle of your cams. Under deck shims are included with angled risers and wedges for easy mounting. Height (mm)28 mm Height (in)1 in Length (mm)65 mm Length (in)2 9/16 in Width (mm)32 mm Width (in)1 1/4...

Wedge kits and risers are available to improve the angle of your cams. Under deck shims are included with angled risers and wedges for easy mounting. Height (mm)25 mm Height (in)1 in Length (mm)65 mm Length (in)2 9/16 in Width (mm)32 mm Width (in)1 1/4...

Swivel cleat bases permit easy cleating and releasing from any angle. Sheave can be relocated up or down to allow the control line to feed from below. Series 20 ball bearing sheave Small "T-Cleat" "Fast Track" fairlead

The Harken 240 Swivel Cam Cleat is a simple swivel base for main and jib sheets on very small boats or for control lines on boats of all sizes. This model works with line up to 12 mm and great for large diameter sheets. Height: 49 mm / 1-15/16 inch...

Swivel cleat bases permit easy cleating and releasing from any angle. The adjustable arm controls the height for optimum cleating angle. The dual rows of race ball bearings in the base minimize friction, while the adjustable ratchet system prevents the...