The Hobie Mirage Cassette Plug is used to fill mirage drive opening when the Mirage Drive is not in use. The plug is not intended to completely seal the opening, only to stop splashes and any gear from falling through the opening when the Mirage Drive is...

A set of two top plugs for Opti masts with mounting holes at the top, such as BlackGold racing masts. Use these to thread your wind indicator with the sail corner ties so that you can quickly remove your sail after a day of sailing.  Includes 2x...

Replacement vane only for the Telo Cat wind indicator.   RESOURCES & SUPPORT Hobie Cat Parts Locators Hobie Cat Rigging Guides Shop All Hobie Cat Parts

1/8 inch diameter batten cap for Hobie kayak sails.   RESOURCES & SUPPORT Hobie Cat Parts Locators Hobie Cat Rigging Guides Shop All Hobie Cat Parts

The Aussie Halyard Ring makes engaging and disengaging the halyard ring from the halyard hook a real snap. This device helps to keep the ring aligned with the hook. Welded one piece design has a clevis pin that is drilled, so a clevis ring can be added...

This wind indicator holder allows both the standard or the low friction wind indicator to be mounted to an Opti with a club mast. Fits all club masts Accepts standard size Opti wind indicators.

Replacement bridle wire for the Hobie Wave with black vinyl covering. RESOURCES & SUPPORT Hobie Cat Parts Locators Hobie Cat Rigging Guides Shop All Hobie Cat Parts

Complete 29er lower mast section with fittings. Manufactured by Ovington Boats.  Oversize Shipping Information This item is considered oversize due to length and/or weight and not eligible for standard shipping. Oversize ground shipping is available...

Replaced your worn out trampoline buckles on your Hobie Adventure Island or Hobie Tandem Island kayak with this convenient assembly. Includes a single piece of webbing with buckle, designed to fit around the cross bar to connect your trampoline...

Protect hands and feet by covering up sharp edges with these soft vinyl molded adjuster covers. Also great for keeping clevis pin rings from getting snagged and working out of the pin. Sold in pairs.   RESOURCES & SUPPORT Hobie Cat Parts...

29er Spreader Tip with slot.

Stainless steel S hook for the Hobie Wave mainsheet. Makes it easy to attach mainsheet to sail and standard on all new boats. RESOURCES & SUPPORT Hobie Cat Parts Locators Hobie Cat Rigging Guides Shop All Hobie Cat Parts

Replacement foam seat pad for Hobie Wave hulls. Each boat used four total seat pads. RESOURCES & SUPPORT Hobie Cat Parts Locators Hobie Cat Rigging Guides Shop All Hobie Cat Parts

The grey racing mast collar is slightly oval to allow for mast rake adjustment. Included inner sleeve that fits around mast to prevent wear. Countersunk mounting holes Grey color 57mm outside diameter of collar 45mm inside diameter of sleeve

Threaded mast for V2 Mirage Drive. Threaded mast Compatible with all Mirage Drive V2 units Length: 11.5 inches Hobie Cat part number 81163001   RESOURCES & SUPPORT Hobie Cat Parts Locators Hobie Cat Rigging Guides Shop All Hobie Cat Parts

1/4 inch diameter clevis pin with a 3 3/8 inch grip length (distance between end of pin and hole for ring ding) from Hobie Cat. Made from stainless steel and sold individually. Pin Diameter (A) is 1/4 in (6.5 mm) Pin Grip Length (B) is 3 3/8 in (86...